P0132 Infiniti Code - Air Fuel Ratio Circuit High Bank 1 Sensor 1
Quick Answer
The Air Fuel Ratio (A/F) sensor is a planar dual-cell limit current sensor. Common causes include Faulty Air fuel ratio (A/F) sensor 1 bank 1, Air fuel ratio (A/F) sensor 1 bank 1 harness is open or shorted, Air fuel ratio (A/F) sensor 1 bank 1 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0132 Infiniti indicates Air Fuel Ratio Circuit High Bank 1 Sensor 1.
- Common causes
- Common causes include Faulty Air fuel ratio (A/F) sensor 1 bank 1, Air fuel ratio (A/F) sensor 1 bank 1 harness is open or shorted, Air fuel ratio (A/F) sensor 1 bank 1 circuit poor electrical connection.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code P0132 Infiniti Description
The sensor is capable of precise measurement λ= 1, but also in the lean and rich range. Together with its control electronics, the sensor outputs a clear, continuous signal throughout a wide range (0.7 < λ < air).
The exhaust gas components diffuse through the diffusion gap at the electrode of the oxygen pump and Nernst concentration cell, where they are brought to thermodynamic balance. An electronic circuit controls the pump current through the oxygen pump cell so that the composition of the exhaust gas in the diffusion gap remains constant at λ = 1. Therefore, the A/F sensor is able to indicate air/fuel ratio by this pumping of current. In addition, a heater is integrated in the sensor to ensure the required operating temperature of 700 - 800°C (1,292 - 1,472°F).
What are the Possible Causes of the DTC P0132 Infiniti?
- Faulty Air fuel ratio (A/F) sensor 1 bank 1
- Air fuel ratio (A/F) sensor 1 bank 1 harness is open or shorted
- Air fuel ratio (A/F) sensor 1 bank 1 circuit poor electrical connection
- Inappropriate fuel pressure
- Faulty fuel injectors
- Intake air leaks may be faulty
- Exhaust gas leaks
How to Fix the DTC P0132 Infiniti?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
For Infiniti models before 2005 see: P0132 Infiniti
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0132 Infiniti code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0132 Infiniti code?
Need more information on how to fix the P0132 Infiniti code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0132 Infiniti code diagnosed by a professional: Find a repair shop in your area
Information for Specific Infiniti Models
- P0132 2003 Infiniti G35 — O2 Sensor Circuit High Bank 1 Sensor 1
- P0132 2004 Infiniti G35 — O2 Sensor Circuit High Bank 1 Sensor 1
- P0132 2005 Infiniti G35 — Air Fuel Ratio Circuit High Bank 1 Sensor 1
- P0132 2006 Infiniti G35 — Air Fuel Ratio Circuit High Bank 1 Sensor 1
Frequently Asked Questions about P0132 Infiniti Code
No Frequently Asked Questions about P0132 Infiniti Code found.
Discuss the causes and fixes for P0132 Infiniti OBDII Code
Code P0132 Infiniti comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
