P0132 2010 Nissan Rogue Code - Air Fuel Ratio Circuit High Bank 1 Sensor 1
Quick Answer
The Air Fuel Ratio (A/F) sensor is a planar dual-cell limit current sensor. Common causes include Faulty Air fuel ratio (A/F) sensor 1 bank 1, Air fuel ratio (A/F) sensor 1 bank 1 harness is open or shorted, Air fuel ratio (A/F) sensor 1 bank 1 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0132 2010 Nissan Rogue indicates Air Fuel Ratio Circuit High Bank 1 Sensor 1.
- Common causes
- Common causes include Faulty Air fuel ratio (A/F) sensor 1 bank 1, Air fuel ratio (A/F) sensor 1 bank 1 harness is open or shorted, Air fuel ratio (A/F) sensor 1 bank 1 circuit poor electrical connection.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code P0132 2010 Nissan Rogue Description
The sensor is capable of precise measurement λ= 1, but also in the lean and rich range. Together with its control electronics, the sensor outputs a clear, continuous signal throughout a wide range (0.7 < λ < air).
The exhaust gas components diffuse through the diffusion gap at the electrode of the oxygen pump and Nernst concentration cell, where they are brought to thermodynamic balance. An electronic circuit controls the pump current through the oxygen pump cell so that the composition of the exhaust gas in the diffusion gap remains constant at λ = 1. Therefore, the A/F sensor is able to indicate air/fuel ratio by this pumping of current. In addition, a heater is integrated in the sensor to ensure the required operating temperature of 700 - 800°C (1,292 - 1,472°F).
What are the Possible Causes of the DTC P0132 2010 Nissan Rogue?
- Faulty Air fuel ratio (A/F) sensor 1 bank 1
- Air fuel ratio (A/F) sensor 1 bank 1 harness is open or shorted
- Air fuel ratio (A/F) sensor 1 bank 1 circuit poor electrical connection
- Inappropriate fuel pressure
- Faulty fuel injectors
- Intake air leaks may be faulty
- Exhaust gas leaks
How to Fix the DTC P0132 2010 Nissan Rogue?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0132 2010 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0132 2010 Nissan Rogue code?
Need more information on how to fix the P0132 2010 Nissan Rogue code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0132 2010 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0132 2010 Nissan Rogue Code
1. What are the common symptoms of OBDII code P0132 on a 2010 Nissan Rogue?
- Common symptoms include poor fuel economy, rough idling, engine hesitation, and an illuminated check engine light.
2. What does the OBDII code P0132 "Air Fuel Ratio Circuit High Bank 1 Sensor 1" indicate in a 2010 Nissan Rogue?
- This code indicates that the oxygen sensor located in Bank 1 Sensor 1 is detecting a high voltage in the air-fuel ratio circuit.
3. What are the possible causes of OBDII code P0132 on a 2010 Nissan Rogue?
- Causes may include a faulty oxygen sensor, a vacuum leak in the exhaust system, issues with the engine's fuel system, or a problem with the wiring or connectors related to the oxygen sensor.
4. How can I diagnose the OBDII code P0132 on my 2010 Nissan Rogue?
- Diagnosing this code may involve using an OBDII scanner to retrieve the specific fault code, checking the wiring and connectors for damage, and testing the oxygen sensor's voltage output.
5. Can I continue driving my 2010 Nissan Rogue with the OBDII code P0132 present?
- While you may be able to drive the vehicle, it is not recommended as the issue can lead to further damage and decreased fuel efficiency. It's best to address the problem promptly.
6. Is it possible to reset the OBDII code P0132 on a 2010 Nissan Rogue without fixing the underlying issue?
- Yes, you can reset the code using an OBDII scanner, but the check engine light is likely to reappear if the root cause of the problem is not addressed.
7. How can I repair OBDII code P0132 on a 2010 Nissan Rogue?
- Repair options may include replacing the Bank 1 Sensor 1 oxygen sensor, repairing any damaged wiring or connectors, fixing exhaust leaks, and ensuring proper fuel system operation.
8. Will fixing the OBDII code P0132 on my 2010 Nissan Rogue improve fuel efficiency?
- Yes, addressing this code can help improve fuel efficiency by ensuring that the air-fuel ratio is properly maintained, leading to better engine performance.
9. How much does it typically cost to repair OBDII code P0132 on a 2010 Nissan Rogue?
- The cost of repairing this code can vary depending on the exact cause of the issue, but it may range from $100 to $300 for parts and labor.
10. Can a DIY enthusiast repair OBDII code P0132 on a 2010 Nissan Rogue?
- While some aspects of the repair, such as replacing the oxygen sensor, may be DIY-friendly, diagnosing and fixing more complex issues may require professional assistance.
Discuss the causes and fixes for P0132 2010 Nissan Rogue OBDII Code
Code P0132 2010 Nissan Rogue comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
