AutoCodes – Dodge – P0131 Dodge

P0131 Dodge Code - O2 Sensor Circuit Low Bank 1 Sensor 1

Quick Answer

The front heated oxygen sensor (or O2 sensor 1) is placed into the exhaust manifold. Common causes include Faulty Front Heated Oxygen Sensor Bank 1, Front Heated Oxygen Sensor Bank 1 harness is open or shorted, Front Heated Oxygen Sensor Bank 1 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means: P0131 Dodge indicates O2 Sensor Circuit Low Bank 1 Sensor 1.
Common causes: Common causes include Faulty Front Heated Oxygen Sensor Bank 1, Front Heated Oxygen Sensor Bank 1 harness is open or shorted, Front Heated Oxygen Sensor Bank 1 circuit poor electrical connection.
Severity: Moderate - service should be scheduled soon.
Can I drive?: The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 30,848

How popular is this code, among other codes? Low

Repair Importance Level

Moderate (Service soon) (2 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 26, 2022

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0131 Dodge Description

The front heated oxygen sensor (or O2 sensor 1) is placed into the exhaust manifold. It detects the amount of oxygen in the exhaust gas compared to the outside air. The heated oxygen sensor 1 has a closed-end tube made of ceramic zirconia. The zirconia generates voltage from approximately 1V in richer conditions to 0V in leaner conditions. The heated oxygen sensor 1 signal is sent to the Engine Control Module (ECM). The ECM adjusts the injection pulse duration to achieve the ideal air-fuel ratio. The ideal air-fuel ratio occurs near the radical change from 1V to 0V.

OBDII Code P0131 Dodge - O2 Sensor Circuit Low Bank 1 Sensor 1 - AutoCodes.com — P0131 Dodge Code - O2 Sensor Circuit Low Bank 1 Sensor 1

What does this mean?

What are the Possible Causes of the DTC P0131 Dodge?

Faulty Front Heated Oxygen Sensor Bank 1
Front Heated Oxygen Sensor Bank 1 harness is open or shorted
Front Heated Oxygen Sensor Bank 1 circuit poor electrical connection
Inappropriate fuel pressure
Faulty fuel injectors
Intake air leaks may be faulty
Exhaust gas leaks

How to Fix the DTC P0131 Dodge?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Replacing the O2 Sensor 1 usually takes care of the problem.

There is a Factory Service Bulletin for following Dodge models:
2005-2006 Dodge Magnum
2005-2006 Dodge Charger
Dodge Factory Service Bulletin OBDII Code P0131

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0131 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0131 Dodge code?

Need more information on how to fix the P0131 Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0131 Dodge code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.