AutoCodes – Nissan – P0128 2013 Nissan Rogue

P0128 2013 Nissan Rogue Code - Thermostat Function

Quick Answer

The thermostat is a component that blocks the flow of coolant to the radiator until the engine has warmed up. Common causes include Leaking or stuck open thermostat, Low engine coolant level, Insufficient warm up time. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0128 2013 Nissan Rogue indicates Thermostat Function.
Common causes: Common causes include Leaking or stuck open thermostat, Low engine coolant level, Insufficient warm up time.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 6,837

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Apr 21, 2019

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0128 2013 Nissan Rogue Description

The thermostat is a component that blocks the flow of coolant to the radiator until the engine has warmed up. When the engine is cold, no coolant flows through the engine. Once the engine reaches its operating temperature, the thermostat opens. The OBDII sets when the engine coolant temperature has not risen enough to open the thermostat even though the engine has run long enough. This is due to a leak in the seal or the thermostat open stuck.

OBDII Code P0128 2013 Nissan Rogue - Thermostat Function - AutoCodes.com — P0128 2013 Nissan Rogue Code - Thermostat Function

What does this mean?

What are the Possible Causes of the DTC P0128 2013 Nissan Rogue?

Leaking or stuck open thermostat
Low engine coolant level
Insufficient warm up time
Faulty engine coolant temperature sensor
Engine coolant temperature sensor harness is open or shorted
Engine coolant temperature sensor circuit poor electrical connection

How to Fix the DTC P0128 2013 Nissan Rogue?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

If cooling system is not leaking and the fluid level is OK, replacing the thermostat usually takes care of the problem.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0128 2013 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0128 2013 Nissan Rogue code?

Need more information on how to fix the P0128 2013 Nissan Rogue code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0128 2013 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0128 2013 Nissan Rogue Code

1. What does OBDII code P0128 in a 2013 Nissan Rogue indicate?

- OBDII code P0128 in a 2013 Nissan Rogue indicates a potential issue with the thermostat.

2. What are the common symptoms of a P0128 code in a 2013 Nissan Rogue?

- Common symptoms of a P0128 code may include a lower than normal engine temperature reading on the dashboard, poor fuel economy, and the Check Engine light illuminating.

3. What are the possible causes of a P0128 code in a 2013 Nissan Rogue?

- The possible causes of a P0128 code in a 2013 Nissan Rogue include a faulty thermostat, a malfunctioning coolant temperature sensor, low coolant levels, or a stuck open thermostat.

4. How can I diagnose a P0128 code in my 2013 Nissan Rogue?

- Diagnosis of a P0128 code in a 2013 Nissan Rogue involves checking the coolant level, inspecting the thermostat for proper operation, and testing the coolant temperature sensor using a scan tool.

5. What are the repair options for a P0128 code in a 2013 Nissan Rogue?

- Repair options for a P0128 code may include replacing the thermostat, replacing the coolant temperature sensor, ensuring proper coolant levels, and flushing the cooling system if necessary.

6. Can I continue driving my 2013 Nissan Rogue with a P0128 code?

- It is not recommended to continue driving your 2013 Nissan Rogue with a P0128 code, as it can lead to engine overheating and potential damage.

7. How much does it cost to fix a P0128 code in a 2013 Nissan Rogue?

- The cost to fix a P0128 code in a 2013 Nissan Rogue can vary depending on the exact cause, but it may range from $100 to $300 for parts and labor.

8. Are there any preventive maintenance tips to avoid a P0128 code in my 2013 Nissan Rogue?

- To prevent a P0128 code, it is advisable to perform regular coolant system checks, follow the manufacturer's recommended maintenance schedule, and address any cooling system issues promptly.

9. Can a DIY enthusiast fix a P0128 code in a 2013 Nissan Rogue?

- Depending on your skills and experience, some DIY enthusiasts may be able to replace the thermostat or coolant temperature sensor to address a P0128 code in a 2013 Nissan Rogue.

10. How long does it take to repair a P0128 code in a 2013 Nissan Rogue?

- The repair time for a P0128 code in a 2013 Nissan Rogue can vary based on the exact issue, but it may take anywhere from 1 to 3 hours for a professional mechanic to diagnose and fix the problem.