AutoCodes – Nissan – P0128 2010 Nissan Rogue

P0128 2010 Nissan Rogue Code - Thermostat Function

Quick Answer

The thermostat is a component that blocks the flow of coolant to the radiator until the engine has warmed up. Common causes include Leaking or stuck open thermostat, Low engine coolant level, Insufficient warm up time. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0128 2010 Nissan Rogue indicates Thermostat Function.
Common causes: Common causes include Leaking or stuck open thermostat, Low engine coolant level, Insufficient warm up time.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 7,367

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Apr 21, 2019

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0128 2010 Nissan Rogue Description

The thermostat is a component that blocks the flow of coolant to the radiator until the engine has warmed up. When the engine is cold, no coolant flows through the engine. Once the engine reaches its operating temperature, the thermostat opens. The OBDII sets when the engine coolant temperature has not risen enough to open the thermostat even though the engine has run long enough. This is due to a leak in the seal or the thermostat open stuck.

OBDII Code P0128 2010 Nissan Rogue - Thermostat Function - AutoCodes.com — P0128 2010 Nissan Rogue Code - Thermostat Function

What does this mean?

What are the Possible Causes of the DTC P0128 2010 Nissan Rogue?

Leaking or stuck open thermostat
Low engine coolant level
Insufficient warm up time
Faulty engine coolant temperature sensor
Engine coolant temperature sensor harness is open or shorted
Engine coolant temperature sensor circuit poor electrical connection

How to Fix the DTC P0128 2010 Nissan Rogue?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

If cooling system is not leaking and the fluid level is OK, replacing the thermostat usually takes care of the problem.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0128 2010 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0128 2010 Nissan Rogue code?

Need more information on how to fix the P0128 2010 Nissan Rogue code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0128 2010 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0128 2010 Nissan Rogue Code

1. What does OBDII code P0128 indicate in a 2010 Nissan Rogue?

The P0128 code in a 2010 Nissan Rogue indicates a potential issue with the thermostat's function.

2. What are the common symptoms of a P0128 code in a Nissan Rogue?

Common symptoms of a P0128 code in a Nissan Rogue include the engine running colder than normal, a decrease in fuel efficiency, and the temperature gauge not reaching the normal operating level.

3. What are the possible causes of a P0128 code in a 2010 Nissan Rogue?

Possible causes of a P0128 code in a 2010 Nissan Rogue include a malfunctioning thermostat, a faulty coolant temperature sensor, low coolant level, or a problem with the cooling system.

4. How can I diagnose the cause of a P0128 code in my Nissan Rogue?

Diagnosing a P0128 code in a Nissan Rogue involves checking the coolant level, inspecting the thermostat for proper operation, testing the coolant temperature sensor, and ensuring the cooling system is functioning correctly.

5. Can I continue driving my Nissan Rogue with a P0128 code?

It is generally not recommended to drive your Nissan Rogue with a P0128 code as it can lead to engine overheating and potential damage. It's best to address the issue promptly.

6. How can I repair a P0128 code in my 2010 Nissan Rogue?

Repairing a P0128 code in a 2010 Nissan Rogue may involve replacing the thermostat, coolant temperature sensor, or addressing any cooling system issues identified during diagnosis.

7. Are there any DIY tips for fixing a P0128 code in a Nissan Rogue?

While some may attempt to replace the thermostat or coolant temperature sensor themselves, it's recommended to have a professional mechanic diagnose and repair the issue to ensure proper resolution.

8. What is the function of the thermostat in a 2010 Nissan Rogue?

The thermostat in a 2010 Nissan Rogue regulates the flow of coolant through the engine to maintain optimal operating temperature, ensuring efficient performance and preventing overheating.

9. How important is it to address a P0128 code promptly in a Nissan Rogue?

Addressing a P0128 code promptly in a Nissan Rogue is crucial to prevent potential engine damage, maintain optimal fuel efficiency, and ensure the vehicle operates reliably.

10. Can a P0128 code in a 2010 Nissan Rogue be reset without fixing the underlying issue?

While you can clear the code temporarily, it will likely reappear if the underlying issue causing the P0128 code is not resolved. It's best to address the root cause of the problem.