P0128 2010 Ford Fusion Code - Coolant Thermostat
Quick Answer
Indicates that the thermostat monitor has not achieved the required engine operating temperature within a specified amount of time after starting the engine. Common causes include Low engine coolant level, Faulty Engine Coolant Temperature (ECT) sensor or cylinder head temp (CHT) sensor, Faulty engine coolant thermostat. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0128 2010 Ford Fusion indicates Coolant Thermostat.
- Common causes
- Common causes include Low engine coolant level, Faulty Engine Coolant Temperature (ECT) sensor or cylinder head temp (CHT) sensor, Faulty engine coolant thermostat.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0128 2010 Ford Fusion Description
What are the Possible Causes of the DTC P0128 2010 Ford Fusion?
- Low engine coolant level
- Faulty Engine Coolant Temperature (ECT) sensor or cylinder head temp (CHT) sensor
- Faulty engine coolant thermostat
- Engine Coolant Temperature (ECT) sensor or cylinder head temp (CHT) sensor harness is open or shorted
- Engine Coolant Temperature (ECT) sensor or cylinder head temp (CHT) sensor circuit poor electrical connection
How to Fix the DTC P0128 2010 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0128 2010 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0128 2010 Ford Fusion code?
Need more information on how to fix the P0128 2010 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0128 2010 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0128 2010 Ford Fusion Code
1. What does the OBDII code P0128 mean on a 2010 Ford Fusion?
The P0128 code indicates that the engine coolant temperature is below the thermostat regulating temperature. It suggests that the thermostat may not be functioning correctly, causing the engine to run cooler than normal.
2. What are common symptoms of code P0128 in a 2010 Ford Fusion?
Symptoms include decreased fuel efficiency, the temperature gauge reading lower than normal, and the heater not working effectively.
3. What causes the P0128 code to appear on a 2010 Ford Fusion?
Common causes include a stuck open thermostat, low coolant levels, a malfunctioning coolant temperature sensor, or problems with the cooling system.
4. How can I fix the P0128 code on a 2010 Ford Fusion?
To fix this issue, you may need to replace the thermostat, refill or replace the coolant, repair any leaks in the cooling system, or replace a faulty coolant temperature sensor.
5. Is it safe to drive a 2010 Ford Fusion with the P0128 code?
While you can drive for a short period, it’s not recommended for long distances as it may lead to engine inefficiency and increased emissions. Prolonged driving with this issue can potentially lead to engine damage.
6. How do I diagnose the cause of the P0128 code in a 2010 Ford Fusion?
Start by checking the coolant level and condition. Then, verify the operation of the thermostat and inspect the coolant temperature sensor. Using a scan tool to check the temperature readings compared to actual engine temperature can help pinpoint the issue.
7. What tools are required to resolve the P0128 code on a 2010 Ford Fusion?
You may need basic hand tools to replace the thermostat or coolant sensor, a scan tool to diagnose sensor data, and possibly a multimeter for electrical testing.
8. Can a faulty thermostat trigger other issues in a 2010 Ford Fusion?
Yes, a faulty thermostat can lead to improper engine temperature regulation, which might cause the engine to run inefficiently, increase emissions, and potentially lead to engine overheating.
9. What is the cost to resolve a P0128 code in a 2010 Ford Fusion?
The cost can vary widely but generally includes parts like a new thermostat (around $20-$50) and labor (around $100-$200), depending on the mechanic and specific repairs needed.
10. How urgent is it to address a P0128 code in a 2010 Ford Fusion?
It should be addressed soon to avoid potential engine damage and to restore proper fuel efficiency and vehicle heating performance.
Discuss the causes and fixes for P0128 2010 Ford Fusion OBDII Code
Code P0128 2010 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
