AutoCodes – Ford – P0127 2012 Ford Fusion

P0127 2012 Ford Fusion Code - Intake Air Temperature 2 Sensor Too High

Quick Answer

The Intake Air Temperature (IAT) sensor is built into Mass Air Flow (MAF) sensor. Common causes include Dirty Air Filter, Faulty Intake Air Temperature (IAT) Sensor, Intake Air Temperature Sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0127 2012 Ford Fusion indicates Intake Air Temperature 2 Sensor Too High.
Common causes: Common causes include Dirty Air Filter, Faulty Intake Air Temperature (IAT) Sensor, Intake Air Temperature Sensor harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 3,311

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jul 13, 2020

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0127 2012 Ford Fusion Description

The Intake Air Temperature (IAT) sensor is built into Mass Air Flow (MAF) sensor. The sensor detects intake air temperature and transmits a signal to the Powertrain Control Module (PCM). The temperature sensing unit uses a thermistor which is sensitive to the change in temperature. The electrical resistance of the thermistor decreases in response to the temperature rise. The Intake Air Temperature signal is used as an input for various systems in the vehicle. It is used by the Powertrain Control Module to assist with the calculation of idle speed, fuel mixture, and spark advance. The Diagnostic Trouble Code (DTC) will set when the PCM detects an excessively high voltage from the sensor.

OBDII Code P0127 2012 Ford Fusion - Intake Air Temperature 2 Sensor Too High - AutoCodes.com — P0127 2012 Ford Fusion Code - Intake Air Temperature 2 Sensor Too High

What does this mean?

What are the Possible Causes of the DTC P0127 2012 Ford Fusion?

Dirty Air Filter
Faulty Intake Air Temperature (IAT) Sensor
Intake Air Temperature Sensor harness is open or shorted
Intake Air Temperature Sensor circuit poor electrical connection
Faulty Powertrain Control Module (PCM)

How to Fix the DTC P0127 2012 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Before replacing the Mass Air Flow (MAF) sensor, try replacing the air filter and cleaning the Mass Air Flow sensor with Mass Air Flow sensor cleaner. Reset code and drive the vehicle. If the code comes back, it may be necessary to replace the Mass Air Flow sensor.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0127 2012 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0127 2012 Ford Fusion code?

Need more information on how to fix the P0127 2012 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0127 2012 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0127 2012 Ford Fusion Code

1. What does the OBDII code P0127 on a 2012 Ford Fusion mean?

- This code indicates that the Intake Air Temperature 2 Sensor is reporting a temperature that is too high.

2. What are the common symptoms of a P0127 code on a 2012 Ford Fusion?

- Common symptoms include poor engine performance, reduced fuel efficiency, and potential stalling.

3. What are the possible causes of a P0127 code on a 2012 Ford Fusion?

- The causes can include a faulty Intake Air Temperature sensor, issues with the sensor wiring, a vacuum leak, or a problem with the engine coolant temperature sensor.

4. How can I diagnose a P0127 code on my 2012 Ford Fusion?

- Use an OBDII scanner to read the code, check the integrity of the wiring to the Intake Air Temperature sensor, and test the sensor itself for proper function.

5. Can I still drive my 2012 Ford Fusion with a P0127 code?

- While it may be possible to drive with this code, it is not recommended as it can lead to further engine issues and decreased performance.

6. What repairs are typically required to fix a P0127 code on a 2012 Ford Fusion?

- Repairs may involve replacing the Intake Air Temperature sensor, repairing any damaged wiring, addressing vacuum leaks, or fixing issues with the engine coolant temperature sensor.

7. Are there any DIY tips for addressing a P0127 code on a 2012 Ford Fusion?

- DIY tips include checking for loose or damaged wiring, ensuring the sensor is clean and free of debris, and consulting the vehicle's manual for sensor location.

8. How important is it to fix a P0127 code promptly on a 2012 Ford Fusion?

- It is important to address this code promptly to prevent potential damage to the engine and ensure optimal performance and fuel efficiency.

9. Can a P0127 code on a 2012 Ford Fusion be triggered by a loose gas cap?

- While a loose gas cap can trigger other codes, it is unlikely to be the cause of a P0127 code related to the Intake Air Temperature sensor.

10. Will resetting the OBDII system clear a P0127 code on a 2012 Ford Fusion?

- Resetting the system may temporarily clear the code, but it is important to diagnose and address the underlying issue to prevent the code from reappearing.