OBDII Code List

P0127 2010 NISSAN VERSA - Intake Air Temperature Too High

Repair Importance Level: 3/3
Repair Difficulty Level: 2/3   
Comments  |  Add Comment

P0127 2010 NISSAN VERSA Possible Causes

  • Faulty Intake Air Temperature (IAT) sensor
  • Intake Air Temperature (IAT) sensor harness is open or shorted
  • Intake Air Temperature (IAT) sensor electrical circuit poor connection

First diagnose P0127 2010 NISSAN VERSA code

    Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

P0127 2010 NISSAN VERSA Tech Notes

The Intake Air Temperature (IAT) is part of the Mass Air Flow (MAF) the MAF assembly it can be cleaned with mass air flow sensor cleaner if cleaning it does not help it will need to be replaced to fix the problem.

Cost of diagnosing the P0127 2010 NISSAN VERSA code

    Labor: 1.0

    The cost of diagnosing the P0127 2010 NISSAN VERSA code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.

P0127 2010 NISSAN VERSA Possible Symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)

P0127 2010 Nissan Versa Description

The Intake Air Temperature (IAT) sensor is variable temperature sensitive resistor that measures the temperature of the air in the intake system. Sensor resistance will change based on air temperature. The higher the temperature is, the lower the resistance. The Engine Control Module (ECM) provides a reference voltage and monitors the voltage drop between a fixed value internal resistance and the sensor resistance. This is called a voltage divider circuit.
IAT sensor values are used by the ECM processor to assist with the calculation of idle speed, fuel mixture and spark advance.
Inaccurate voltages from the IAT sensor may affect pulse-width, idle quality, and tail pipe emissions. Intermittent signals may cause hesitation, stumble and surging. If an IAT sensor failure accompanies an Engine Coolant Temperature (ECT) sensor failure, cooling fan operation may also be affected.
Some manufacturers incorporate the Intake Air Temperature (IAT) sensor as part of the Mass Air Flow (MAF) sensor (Air Flow Meter).
OBDII Code P0127 2010 Nissan Versa - Intake Air Temperature Too High -

P0127 2010 NISSAN VERSA More Information

Need more information on how to fix the P0127 2010 NISSAN VERSA code?
Get Access to Factory Service Manuals

Need more help?

Get the P0127 2010 Nissan Versa code diagnosed by a professional: Find a repair shop in your area

Related Information

P0127 2010 NISSAN VERSA Comments

Help us improve Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P0127 2010 Nissan Versa code? Have you replaced any parts?
Any information is appreciated. Thanks
Top ⇧