AutoCodes – GMC – P0125 GMC

P0125 GMC Code - Insufficient Coolant Temperature For Closed Loop Fuel Control

Quick Answer

An Engine Coolant Temperature (ECT) sensor monitors the temperature of the coolant. Common causes include Low engine coolant level, Leaking or stuck open thermostat, Faulty Engine Coolant Temperature (ECT) sensor. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0125 GMC indicates Insufficient Coolant Temperature For Closed Loop Fuel Control.
Common causes: Common causes include Low engine coolant level, Leaking or stuck open thermostat, Faulty Engine Coolant Temperature (ECT) sensor.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 8,599

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jul 21, 2021

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0125 GMC Description

An Engine Coolant Temperature (ECT) sensor monitors the temperature of the coolant. This input is used by the Powertrain Control Module (PCM) for engine control and as an enabling criteria for some diagnostics. The airflow into the engine is accumulated and used to determine if the vehicle has been driven within the conditions that would allow the engine coolant to heat up normally to the Closed Loop temperature. If the coolant temperature does not increase normally or does not reach the Closed Loop temperature, the diagnostics that use engine coolant temperature as enabling criteria may not run when expected. If the PCM detects the calibrated amount of airflow and engine run time have been met, and the engine coolant has not met the Closed Loop temperature, Diagnostic Trouble Code (DTC) P0125 sets.

OBDII Code P0125 GMC - Insufficient Coolant Temperature For Closed Loop Fuel Control - AutoCodes.com — P0125 GMC Code - Insufficient Coolant Temperature For Closed Loop Fuel Control

What does this mean?

What are the Possible Causes of the DTC P0125 GMC?

Low engine coolant level
Leaking or stuck open thermostat
Faulty Engine Coolant Temperature (ECT) sensor
Engine Coolant Temperature sensor harness is open or shorted
Engine Coolant Temperature sensor electrical circuit poor connection

How to Fix the DTC P0125 GMC?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0125 GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0125 GMC code?

Need more information on how to fix the P0125 GMC code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0125 GMC code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.