P0123 Hyundai Code - Throttle/Pedal Position Sensor 'A' Circuit High Input
Quick Answer
The Throttle Position Sensor (TPS) responds to the accelerator pedal movement. Common causes include Faulty throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0123 Hyundai indicates Throttle/Pedal Position Sensor 'A' Circuit High Input.
- Common causes
- Common causes include Faulty throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0123 Hyundai Description
Idle position of the throttle valve is determined by the ECM receiving the signal from the throttle position sensor. This sensor controls engine operation such as fuel cut. On the other hand, the Wide open and closed throttle position switch, which is built into the throttle position sensor unit, is not used for engine control.
What are the Possible Causes of the DTC P0123 Hyundai?
- Faulty throttle position sensor
- Throttle position sensor harness is open or shorted
- Throttle position sensor circuit poor electrical connection
How to Fix the DTC P0123 Hyundai?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0123 Hyundai code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0123 Hyundai code?
Need more information on how to fix the P0123 Hyundai code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0123 Hyundai code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0123 Hyundai Code
1. What are the common symptoms of OBDII code P0123 in a Hyundai?
- Common symptoms include issues with acceleration, decreased engine power, stalling, and in some cases, the Check Engine light may illuminate.
2. What does the OBDII code P0123 for a Hyundai indicate?
- The code P0123 indicates that the Throttle/Pedal Position Sensor 'A' Circuit is registering a high input signal, which can affect the vehicle's performance.
3. What are the possible causes of code P0123 in a Hyundai?
- Possible causes include a faulty throttle position sensor, damaged wiring or connectors in the sensor circuit, a defective engine control module (ECM), or even a stuck throttle.
4. How can I diagnose the cause of OBDII code P0123 in my Hyundai?
- Diagnosing the issue involves checking the throttle position sensor's wiring and connectors for damage, testing the sensor's functionality, and scanning the ECM for any related faults.
5. Can I drive my Hyundai with OBDII code P0123 present?
- It is not recommended to drive the vehicle with code P0123 present, as it can lead to erratic behavior, reduced engine performance, and potential safety hazards.
6. How can I repair OBDII code P0123 in my Hyundai?
- Repair options include replacing the throttle position sensor, repairing any damaged wiring or connectors, resetting the ECM, or seeking professional help for a thorough diagnosis and repair.
7. Are there any DIY tips for fixing code P0123 in a Hyundai?
- DIY tips include checking the sensor's wiring for breaks or frays, cleaning the sensor and connectors, and ensuring proper installation of any replacement parts.
8. Will resetting the ECM clear OBDII code P0123 in a Hyundai?
- Resetting the ECM may temporarily clear the code, but if the underlying issue causing code P0123 is not addressed, the code is likely to reappear.
9. How much does it typically cost to repair OBDII code P0123 in a Hyundai?
- The cost of repair can vary depending on the specific cause of the issue, but it may range from around $100 for a DIY fix to several hundred dollars if professional help is required.
10. Can OBDII code P0123 in a Hyundai cause long-term damage if left unresolved?
- If left unresolved, code P0123 can potentially cause further damage to the engine or other components, leading to more costly repairs down the line.
Discuss the causes and fixes for P0123 Hyundai OBDII Code
-
Where is the po123 sesor on the hyundai tiburon GT 2004. To help me get a high voitage because my is goning up and down the RPM. Kind you,Please Help.
-
The P0123, as mention above, is for the Throttle Position Sensor and sensor is mounted on the throttle body.
-
Throttle body was taken out to clean on my Hyundai Tuscan now i have a P0123 circuit open code. Auto zone said he forgot to put on the gasket. He said its electrical. Which is it? I didnt have this problem before
-
It's an electric problem, a missing gasket wont cause this type of code. Have you try clearing the code? is the connector firmly connected?
-
I have cleared the code and will run it tonight. But is it customary to change the throttle body sensor or to have to reprogram it on this car it's a 2006 Hyundai Tuscan 4wd.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
