P0123 2015 Toyota RAV4 Code - Throttle / Pedal Position Sensor / Switch 'A' Circuit High Input
Quick Answer
The throttle position sensor is mounted on the throttle with motor body assembly and detects the opening angle of the throttle valve. Common causes include Faulty Throttle Position Sensor (built into Throttle Body Assembly), Throttle Position Sensor circuit is open or shorted, Throttle Position Sensor poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0123 2015 Toyota RAV4 indicates Throttle / Pedal Position Sensor / Switch 'A' Circuit High Input.
- Common causes
- Common causes include Faulty Throttle Position Sensor (built into Throttle Body Assembly), Throttle Position Sensor circuit is open or shorted, Throttle Position Sensor poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0123 2015 Toyota RAV4 Description
As the valve closes, the sensor output voltage decreases and as the valve opens, the sensor output voltage increases. The Engine Control Module (ECM) calculates the throttle valve opening angle according to these signals and controls the throttle actuator in response to driver inputs. These signals are also used in calculations such as air-fuel ratio correction, power increase correction, and fuel-cut control.
The ECM uses the throttle position sensor to monitor the throttle valve opening angle. There are several checks that the ECM performs to confirm the proper operation of the throttle position sensor.
This sensor transmits two signals, if the output voltage difference between the two signals deviates from the normal operating range, the ECM interprets this as a malfunction in the throttle position sensor. The ECM illuminates the MIL and stores the Diagnostic Trouble Code (DTC).
What are the Possible Causes of the DTC P0123 2015 Toyota RAV4?
- Faulty Throttle Position Sensor (built into Throttle Body Assembly)
- Throttle Position Sensor circuit is open or shorted
- Throttle Position Sensor poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0123 2015 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
User Submitted Video
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0123 2015 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0123 2015 Toyota RAV4 code?
Need more information on how to fix the P0123 2015 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0123 2015 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0123 2015 Toyota RAV4 Code
1. What does the OBDII code P0123 mean on a 2015 Toyota RAV4?
P0123 indicates that the Engine Control Module (ECM) has detected a high voltage signal from the Throttle/Pedal Position Sensor/Switch 'A' circuit.
2. What are the common symptoms of code P0123 in a 2015 Toyota RAV4?
Common symptoms include poor acceleration, difficulty idling, reduced engine performance, the vehicle going into limp mode, and the check engine light turning on.
3. What causes the P0123 code to appear on a 2015 Toyota RAV4?
Potential causes include a faulty throttle position sensor, damaged or corroded wiring, a bad throttle body, or a malfunctioning ECM.
4. Can I drive my 2015 Toyota RAV4 with the P0123 code?
It’s not recommended, as it may lead to reduced performance, unsafe driving conditions, and potential damage to engine components if the problem is not addressed.
5. How do you diagnose the P0123 code on a 2015 Toyota RAV4?
Diagnosis involves scanning the ECM for codes, inspecting the throttle position sensor and its wiring for damage, testing the sensor's voltage, and checking for proper grounding.
6. How can I fix the P0123 code on my 2015 Toyota RAV4?
Repairs may include replacing the throttle position sensor, repairing damaged wiring, cleaning the throttle body, or reprogramming or replacing the ECM if necessary.
7. How much does it cost to fix the P0123 code on a 2015 Toyota RAV4?
Repair costs vary, but replacing a throttle position sensor typically ranges from $100 to $300, depending on labor rates and parts.
8. Can a dirty throttle body cause the P0123 code on a 2015 Toyota RAV4?
Yes, a dirty throttle body can lead to improper sensor readings, which may trigger the P0123 code.
9. Does the P0123 code on a 2015 Toyota RAV4 always mean the throttle position sensor is bad?
No, while the throttle position sensor is a common cause, the issue could also stem from wiring problems, a faulty ECM, or other related components.
10. How can I prevent the P0123 code from returning on my 2015 Toyota RAV4?
Regular maintenance, such as cleaning the throttle body and inspecting wiring for damage or corrosion, can help prevent this code from reoccurring.
Discuss the causes and fixes for P0123 2015 Toyota RAV4 OBDII Code
Code P0123 2015 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
