P0123 2011 Nissan Sentra Code - Throttle Position Sensor/Switch '1' Circuit High Input
Quick Answer
The Throttle Position Sensor (TPS) responds to the accelerator pedal movement. Common causes include Faulty throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0123 2011 Nissan Sentra indicates Throttle Position Sensor/Switch '1' Circuit High Input.
- Common causes
- Common causes include Faulty throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0123 2011 Nissan Sentra Description
Idle position of the throttle valve is determined by the ECM receiving the signal from the throttle position sensor. This sensor controls engine operation such as fuel cut. On the other hand, the Wide open and closed throttle position switch, which is built into the throttle position sensor unit, is not used for engine control.
What are the Possible Causes of the DTC P0123 2011 Nissan Sentra?
- Faulty throttle position sensor
- Throttle position sensor harness is open or shorted
- Throttle position sensor circuit poor electrical connection
How to Fix the DTC P0123 2011 Nissan Sentra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0123 2011 Nissan Sentra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0123 2011 Nissan Sentra code?
Need more information on how to fix the P0123 2011 Nissan Sentra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0123 2011 Nissan Sentra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0123 2011 Nissan Sentra Code
1. What are the common symptoms of OBDII code P0123 in a 2011 Nissan Sentra?
When the throttle position sensor/switch '1' circuit registers a high input, you may experience issues such as poor acceleration, stalling, or even the vehicle going into limp mode.
2. What are the possible causes of OBDII code P0123 in a 2011 Nissan Sentra?
Common causes of the throttle position sensor/switch '1' circuit high input error include a faulty throttle position sensor, damaged wiring or connectors, or a problem with the engine control module.
3. How can I diagnose the OBDII code P0123 in my 2011 Nissan Sentra?
To diagnose the P0123 code, you can use an OBDII scanner to retrieve the fault code and then inspect the throttle position sensor, wiring, and connectors for any visible damage or issues.
4. Can I continue driving my 2011 Nissan Sentra with OBDII code P0123?
It is not recommended to continue driving your vehicle with the P0123 code present, as it can lead to further damage and potential safety hazards. It's best to address the issue promptly.
5. What are the repair options for fixing OBDII code P0123 in a 2011 Nissan Sentra?
Repair options for resolving the P0123 code may include replacing the throttle position sensor, repairing or replacing damaged wiring or connectors, or reprogramming the engine control module.
6. How much does it cost to fix OBDII code P0123 in a 2011 Nissan Sentra?
The cost of fixing the P0123 code can vary depending on the specific issue causing the high input error. Costs may include parts and labor for sensor replacement, wiring repairs, or module reprogramming.
7. Can I reset the OBDII code P0123 in my 2011 Nissan Sentra without repairing the issue?
While you can clear the fault code using an OBDII scanner, it is not recommended to do so without addressing the underlying problem. The code is likely to reappear if the issue is not fixed.
8. How long does it take to repair OBDII code P0123 in a 2011 Nissan Sentra?
The repair time for the P0123 code can vary depending on the specific cause of the high input error. Simple fixes like sensor replacement may take around an hour, while more complex issues could require more time.
9. Are there any DIY tips for troubleshooting OBDII code P0123 in a 2011 Nissan Sentra?
If you have some automotive knowledge, you can start by checking the throttle position sensor's wiring and connectors for any visible damage before considering sensor replacement or seeking professional help.
10. Will OBDII code P0123 cause my 2011 Nissan Sentra to fail an emissions test?
Since the P0123 code relates to the throttle position sensor circuit, it may not directly cause your vehicle to fail an emissions test. However, it's essential to address the issue to ensure proper vehicle performance and compliance.
Discuss the causes and fixes for P0123 2011 Nissan Sentra OBDII Code
Code P0123 2011 Nissan Sentra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
