P0123 2010 Nissan Rogue Code - Throttle Position Sensor/Switch '1' Circuit High Input
Quick Answer
The Throttle Position Sensor (TPS) responds to the accelerator pedal movement. Common causes include Faulty throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0123 2010 Nissan Rogue indicates Throttle Position Sensor/Switch '1' Circuit High Input.
- Common causes
- Common causes include Faulty throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0123 2010 Nissan Rogue Description
Idle position of the throttle valve is determined by the ECM receiving the signal from the throttle position sensor. This sensor controls engine operation such as fuel cut. On the other hand, the Wide open and closed throttle position switch, which is built into the throttle position sensor unit, is not used for engine control.
What are the Possible Causes of the DTC P0123 2010 Nissan Rogue?
- Faulty throttle position sensor
- Throttle position sensor harness is open or shorted
- Throttle position sensor circuit poor electrical connection
How to Fix the DTC P0123 2010 Nissan Rogue?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0123 2010 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0123 2010 Nissan Rogue code?
Need more information on how to fix the P0123 2010 Nissan Rogue code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0123 2010 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0123 2010 Nissan Rogue Code
1. What does OBDII code P0123 mean on a 2010 Nissan Rogue?
Code P0123 indicates a high input signal from the throttle position sensor or switch '1' circuit in the Nissan Rogue's engine control module.
2. What are the common symptoms of a P0123 code in a 2010 Nissan Rogue?
Common symptoms of a P0123 code in a Nissan Rogue may include issues with acceleration, lack of power, stalling, and potentially even triggering the vehicle into "limp mode."
3. What are the possible causes of a P0123 code in a 2010 Nissan Rogue?
Potential causes of a P0123 code in a Nissan Rogue include a faulty throttle position sensor, damaged wiring or connectors in the throttle position sensor circuit, or issues with the engine control module.
4. How can I diagnose a P0123 code in my 2010 Nissan Rogue?
Diagnosing a P0123 code in a Nissan Rogue typically involves checking the throttle position sensor's wiring and connectors for damage, testing the sensor's voltage output, and potentially using a multimeter to measure resistance.
5. Can I continue driving my 2010 Nissan Rogue with a P0123 code?
It is not recommended to drive a vehicle with a P0123 code, as it can affect the engine's performance and potentially lead to more serious issues if not addressed promptly.
6. How can I repair a P0123 code in my 2010 Nissan Rogue?
Repairing a P0123 code in a Nissan Rogue may involve replacing the throttle position sensor, repairing damaged wiring or connectors, or resetting the engine control module after addressing any underlying issues.
7. Will resetting the check engine light resolve a P0123 code in my 2010 Nissan Rogue?
Simply resetting the check engine light will not fix the underlying issue causing the P0123 code in a Nissan Rogue. It is important to diagnose and address the root cause of the code to prevent further problems.
8. How much does it typically cost to fix a P0123 code in a 2010 Nissan Rogue?
The cost of fixing a P0123 code in a Nissan Rogue can vary depending on the exact cause of the issue, the parts needed for repair, and labor costs. It is advisable to consult a mechanic for an accurate estimate.
9. Can a DIY enthusiast repair a P0123 code in a 2010 Nissan Rogue?
While some DIY enthusiasts may be able to address a P0123 code by replacing the throttle position sensor or checking wiring connections, it is recommended to have a professional mechanic diagnose and repair the issue for optimal results.
10. How long does it take to fix a P0123 code in a 2010 Nissan Rogue?
The time required to fix a P0123 code in a Nissan Rogue can vary depending on the exact cause of the problem and the complexity of the repair. It is best to consult with a mechanic to get an estimate of the repair time.
Discuss the causes and fixes for P0123 2010 Nissan Rogue OBDII Code
Code P0123 2010 Nissan Rogue comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
