P0123 2009 Nissan Altima Sedan Code - Throttle Position Sensor/Switch '1' Circuit High Input
Quick Answer
The Throttle Position Sensor (TPS) responds to the accelerator pedal movement. Common causes include Faulty throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0123 2009 Nissan Altima Sedan indicates Throttle Position Sensor/Switch '1' Circuit High Input.
- Common causes
- Common causes include Faulty throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0123 2009 Nissan Altima Sedan Description
Idle position of the throttle valve is determined by the ECM receiving the signal from the throttle position sensor. This sensor controls engine operation such as fuel cut. On the other hand, the Wide open and closed throttle position switch, which is built into the throttle position sensor unit, is not used for engine control.
What are the Possible Causes of the DTC P0123 2009 Nissan Altima Sedan?
- Faulty throttle position sensor
- Throttle position sensor harness is open or shorted
- Throttle position sensor circuit poor electrical connection
How to Fix the DTC P0123 2009 Nissan Altima Sedan?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0123 2009 Nissan Altima Sedan code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0123 2009 Nissan Altima Sedan code?
Need more information on how to fix the P0123 2009 Nissan Altima Sedan code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0123 2009 Nissan Altima Sedan code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0123 2009 Nissan Altima Sedan Code
1. What are the common symptoms of OBDII code P0123 in a 2009 Nissan Altima Sedan?
- Common symptoms include poor acceleration, hesitation, rough idling, and potentially stalling of the vehicle.
2. What could cause the Throttle Position Sensor/Switch '1' Circuit High Input code (P0123) in a 2009 Nissan Altima Sedan?
- The code is usually triggered by a faulty throttle position sensor, damaged wiring or connectors, or a problem with the engine control module.
3. How can I diagnose the cause of OBDII code P0123 in my 2009 Nissan Altima Sedan?
- You can use a scan tool to read the code and then test the throttle position sensor for proper voltage signals. Check the wiring and connectors for any damage or corrosion.
4. Can I continue driving my 2009 Nissan Altima Sedan with the P0123 code present?
- It is not recommended to continue driving with this code as it can lead to poor engine performance and potential safety hazards. It's best to address the issue promptly.
5. How can I repair OBDII code P0123 in my 2009 Nissan Altima Sedan?
- The most common repair involves replacing the throttle position sensor. Ensure proper installation and check the wiring and connectors for any issues.
6. Are there any DIY tips for fixing the Throttle Position Sensor/Switch '1' Circuit High Input code in a 2009 Nissan Altima Sedan?
- While replacing the throttle position sensor is straightforward, ensure you have the right tools and follow the manufacturer's instructions. Double-check all connections post-repair.
7. Will resetting the OBDII code P0123 in my 2009 Nissan Altima Sedan make it go away permanently?
- Resetting the code may clear it temporarily, but if the underlying issue causing the code is not addressed, it is likely to return. It's essential to diagnose and fix the root cause.
8. Is it safe to drive my 2009 Nissan Altima Sedan if the throttle position sensor is malfunctioning?
- Driving with a malfunctioning throttle position sensor can affect the vehicle's performance and fuel efficiency. It's best to address the issue promptly to avoid potential safety risks.
9. Can extreme weather conditions cause the Throttle Position Sensor/Switch '1' Circuit High Input code in a 2009 Nissan Altima Sedan?
- While extreme weather alone may not cause this specific code, it can exacerbate existing issues with the throttle position sensor or related components due to temperature fluctuations.
10. How much can I expect to pay for repairing OBDII code P0123 in my 2009 Nissan Altima Sedan at a professional mechanic or dealership?
- The cost of repairing this code can vary depending on the labor rates and parts prices, but it typically ranges from $150 to $300 for parts and labor.
Discuss the causes and fixes for P0123 2009 Nissan Altima Sedan OBDII Code
Code P0123 2009 Nissan Altima Sedan comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
