P0123 2008 Nissan Altima Sedan Code - Throttle Position Sensor/Switch '1' Circuit High Input
Quick Answer
The Throttle Position Sensor (TPS) responds to the accelerator pedal movement. Common causes include Faulty throttle position sensor 2, Throttle position sensor harness 2 is open or shorted, Throttle position sensor 2 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0123 2008 Nissan Altima Sedan indicates Throttle Position Sensor/Switch '1' Circuit High Input.
- Common causes
- Common causes include Faulty throttle position sensor 2, Throttle position sensor harness 2 is open or shorted, Throttle position sensor 2 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0123 2008 Nissan Altima Sedan Description
Idle position of the throttle valve is determined by the ECM receiving the signal from the throttle position sensor. This sensor controls engine operation such as fuel cut. On the other hand, the Wide open and closed throttle position switch, which is built into the throttle position sensor unit, is not used for engine control.
What are the Possible Causes of the DTC P0123 2008 Nissan Altima Sedan?
- Faulty throttle position sensor 2
- Throttle position sensor harness 2 is open or shorted
- Throttle position sensor 2 circuit poor electrical connection
How to Fix the DTC P0123 2008 Nissan Altima Sedan?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0123 2008 Nissan Altima Sedan code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0123 2008 Nissan Altima Sedan code?
Need more information on how to fix the P0123 2008 Nissan Altima Sedan code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0123 2008 Nissan Altima Sedan code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0123 2008 Nissan Altima Sedan Code
1. What are the common symptoms of OBDII code P0123 in a 2008 Nissan Altima Sedan?
- Common symptoms include a lack of power, hesitation or jerking during acceleration, poor fuel economy, and the vehicle going into limp mode.
2. What causes the Throttle Position Sensor/Switch '1' Circuit High Input code (P0123) in a 2008 Nissan Altima Sedan?
- The P0123 code is typically caused by a faulty throttle position sensor, a damaged or frayed sensor wiring, or a poor electrical connection.
3. How can I diagnose the Throttle Position Sensor/Switch '1' Circuit High Input code on my 2008 Nissan Altima Sedan?
- You can diagnose the P0123 code by checking the throttle position sensor's wiring and connector for any damage, testing the sensor's voltage output, and using a scan tool to monitor sensor data.
4. Can I continue driving my 2008 Nissan Altima Sedan with OBDII code P0123?
- It is not recommended to drive with the P0123 code as it can lead to poor engine performance and potential safety issues. It's best to address the issue promptly.
5. How do I repair the Throttle Position Sensor/Switch '1' Circuit High Input code on my 2008 Nissan Altima Sedan?
- Repair options include replacing the throttle position sensor, repairing any damaged wiring or connectors, and clearing the trouble code with a scan tool.
6. Are there any DIY tips for fixing the P0123 code on a 2008 Nissan Altima Sedan?
- DIY enthusiasts can attempt to replace the throttle position sensor themselves by following a repair manual or online tutorials. However, electrical repairs should be done with caution.
7. Will resetting the OBDII code P0123 in my 2008 Nissan Altima Sedan make it go away permanently?
- Resetting the code may temporarily clear the warning light, but if the underlying issue causing the P0123 code is not fixed, the code is likely to reappear.
8. How much does it typically cost to repair the Throttle Position Sensor/Switch '1' Circuit High Input code on a 2008 Nissan Altima Sedan?
- The cost of repairing the P0123 code can vary depending on the cause of the issue, but it may range from $100 to $300 for parts and labor.
9. Can a dirty throttle body or intake system cause the OBDII code P0123 in a 2008 Nissan Altima Sedan?
- While a dirty throttle body or intake system can sometimes affect sensor readings, the P0123 code is more likely related to a faulty throttle position sensor or wiring issue.
10. Is it necessary to visit a dealership for diagnosing and repairing the P0123 code on my 2008 Nissan Altima Sedan?
- You can choose to visit a dealership, an independent mechanic, or even diagnose and repair the issue yourself, depending on your comfort level and expertise with automotive repairs.
Discuss the causes and fixes for P0123 2008 Nissan Altima Sedan OBDII Code
Code P0123 2008 Nissan Altima Sedan comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
