P0123 2006 Scion xB Code - Throttle Position Sensor/Switch 'A' Circuit High Input
Quick Answer
The Throttle Position Sensor (TPS) responds to the accelerator pedal movement. Common causes include Faulty throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0123 2006 Scion xB indicates Throttle Position Sensor/Switch 'A' Circuit High Input.
- Common causes
- Common causes include Faulty throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0123 2006 Scion xB Description
Idle position of the throttle valve is determined by the ECM receiving the signal from the throttle position sensor. This sensor controls engine operation such as fuel cut. On the other hand, the Wide open and closed throttle position switch, which is built into the throttle position sensor unit, is not used for engine control.
What are the Possible Causes of the DTC P0123 2006 Scion xB?
- Faulty throttle position sensor
- Throttle position sensor harness is open or shorted
- Throttle position sensor circuit poor electrical connection
- ECM
How to Fix the DTC P0123 2006 Scion xB?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0123 2006 Scion xB code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0123 2006 Scion xB code?
Need more information on how to fix the P0123 2006 Scion xB code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0123 2006 Scion xB code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0123 2006 Scion xB Code
1. What are the common symptoms of OBDII code P0123 in a 2006 Scion xB?
- Common symptoms include poor acceleration, stalling, rough idling, and decreased fuel efficiency.
2. What does the OBDII code P0123 in a 2006 Scion xB indicate?
- The code P0123 indicates an issue with the Throttle Position Sensor/Switch 'A' circuit having a high input signal.
3. What are the possible causes of the Throttle Position Sensor/Switch 'A' Circuit High Input code in a 2006 Scion xB?
- Possible causes include a faulty throttle position sensor, damaged wiring or connectors, a dirty throttle body, or a malfunctioning engine control module (ECM).
4. How can I diagnose the Throttle Position Sensor/Switch 'A' Circuit High Input issue in my 2006 Scion xB?
- You can diagnose the issue by checking the throttle position sensor's voltage output, inspecting the wiring for any damage, and verifying the throttle body's cleanliness.
5. Can I drive my 2006 Scion xB with OBDII code P0123?
- It is not recommended to drive the vehicle with code P0123 as it can lead to further damage and potentially unsafe driving conditions.
6. How can I repair the Throttle Position Sensor/Switch 'A' Circuit High Input issue in my 2006 Scion xB?
- Repair options may include replacing the throttle position sensor, repairing damaged wiring, cleaning the throttle body, or resetting the ECM.
7. Is it possible to clear the OBDII code P0123 in a 2006 Scion xB by disconnecting the battery?
- Disconnecting the battery may clear the code temporarily, but it is recommended to diagnose and fix the underlying issue to prevent the code from reappearing.
8. How much does it typically cost to repair the Throttle Position Sensor/Switch 'A' Circuit High Input issue in a 2006 Scion xB?
- The cost of repair can vary depending on the exact cause of the issue, but it may range from $100 to $300 for parts and labor.
9. Can a DIY enthusiast replace the throttle position sensor in a 2006 Scion xB to fix code P0123?
- Yes, replacing the throttle position sensor can be a DIY project for those with some mechanical knowledge and the right tools. However, proper diagnosis is crucial before replacing any parts.
10. Will fixing the Throttle Position Sensor/Switch 'A' Circuit High Input code improve the performance of my 2006 Scion xB?
- Yes, resolving the issue related to code P0123 should lead to improved engine performance, better fuel efficiency, and smoother acceleration in your Scion xB.
Discuss the causes and fixes for P0123 2006 Scion xB OBDII Code
Code P0123 2006 Scion xB comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
