P0123 2005 Toyota Highlander Code - Throttle Position Sensor/Switch 'A' Circuit High Input
Quick Answer
The Throttle Position Sensor (TPS) responds to the accelerator pedal movement. Common causes include Faulty throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0123 2005 Toyota Highlander indicates Throttle Position Sensor/Switch 'A' Circuit High Input.
- Common causes
- Common causes include Faulty throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0123 2005 Toyota Highlander Description
Idle position of the throttle valve is determined by the ECM receiving the signal from the throttle position sensor. This sensor controls engine operation such as fuel cut. On the other hand, the Wide open and closed throttle position switch, which is built into the throttle position sensor unit, is not used for engine control.
What are the Possible Causes of the DTC P0123 2005 Toyota Highlander?
- Faulty throttle position sensor
- Throttle position sensor harness is open or shorted
- Throttle position sensor circuit poor electrical connection
How to Fix the DTC P0123 2005 Toyota Highlander?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0123 2005 Toyota Highlander code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0123 2005 Toyota Highlander code?
Need more information on how to fix the P0123 2005 Toyota Highlander code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0123 2005 Toyota Highlander code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0123 2005 Toyota Highlander Code
1. What does OBDII code P0123 mean for a 2005 Toyota Highlander?
The code P0123 indicates a potential issue with the Throttle Position Sensor/Switch 'A' Circuit High Input in the vehicle.
2. What are the common symptoms of a Throttle Position Sensor/Switch 'A' Circuit High Input issue on a 2005 Toyota Highlander?
Common symptoms include poor acceleration, decreased fuel efficiency, rough idling, and potential stalling of the engine.
3. What are the possible causes of OBDII code P0123 in a 2005 Toyota Highlander?
Possible causes of this code include a faulty throttle position sensor, damaged wiring or connectors in the circuit, or a problem with the engine control module.
4. How can I diagnose the Throttle Position Sensor/Switch 'A' Circuit High Input issue on my 2005 Toyota Highlander?
Diagnosing this issue typically involves using a scan tool to read the OBDII code, testing the throttle position sensor for proper voltage output, and inspecting the wiring and connectors for any damage.
5. Can I continue driving my 2005 Toyota Highlander with OBDII code P0123?
It is not recommended to continue driving with this code as it can lead to further damage to the engine and other components. It is best to address the issue promptly.
6. How can I repair the Throttle Position Sensor/Switch 'A' Circuit High Input problem on my 2005 Toyota Highlander?
Repairing this issue may involve replacing the throttle position sensor, repairing any damaged wiring or connectors, or reprogramming the engine control module.
7. Can a DIY enthusiast fix the OBDII code P0123 on a 2005 Toyota Highlander?
While some DIY enthusiasts may be able to address this issue themselves, it is recommended to consult a professional mechanic for proper diagnosis and repair to ensure the problem is resolved correctly.
8. How much does it cost to repair OBDII code P0123 on a 2005 Toyota Highlander?
The cost of repairing this issue can vary depending on the exact cause of the problem, the cost of parts, and the labor rates of the repair shop. It is advisable to obtain quotes from different mechanics.
9. Will resetting the OBDII code P0123 on my 2005 Toyota Highlander make the issue go away?
Resetting the code may temporarily clear the warning light, but it will not fix the underlying problem causing the code. It is important to diagnose and repair the issue to prevent further issues.
10. How often does the Throttle Position Sensor/Switch 'A' Circuit High Input issue occur in 2005 Toyota Highlanders?
While this issue may not be extremely common, it can still occur due to various factors such as age, wear and tear, or electrical issues in the vehicle. Regular maintenance and inspections can help prevent such problems.
Discuss the causes and fixes for P0123 2005 Toyota Highlander OBDII Code
Code P0123 2005 Toyota Highlander comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
