P0123 2005 Nissan Altima Sedan Code - Throttle Position Sensor/Switch '1' Circuit High Input
Quick Answer
The Throttle Position Sensor (TPS) responds to the accelerator pedal movement. Common causes include Faulty throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0123 2005 Nissan Altima Sedan indicates Throttle Position Sensor/Switch '1' Circuit High Input.
- Common causes
- Common causes include Faulty throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0123 2005 Nissan Altima Sedan Description
Idle position of the throttle valve is determined by the ECM receiving the signal from the throttle position sensor. This sensor controls engine operation such as fuel cut. On the other hand, the Wide open and closed throttle position switch, which is built into the throttle position sensor unit, is not used for engine control.
What are the Possible Causes of the DTC P0123 2005 Nissan Altima Sedan?
- Faulty throttle position sensor
- Throttle position sensor harness is open or shorted
- Throttle position sensor circuit poor electrical connection
How to Fix the DTC P0123 2005 Nissan Altima Sedan?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0123 2005 Nissan Altima Sedan code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0123 2005 Nissan Altima Sedan code?
Need more information on how to fix the P0123 2005 Nissan Altima Sedan code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0123 2005 Nissan Altima Sedan code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0123 2005 Nissan Altima Sedan Code
1. What are the common symptoms of OBDII code P0123 on a 2005 Nissan Altima Sedan?
- Common symptoms include issues with acceleration, rough idling, poor fuel efficiency, and potential stalling of the engine.
2. What does the Throttle Position Sensor/Switch '1' Circuit High Input error code P0123 indicate?
- The P0123 code indicates that the Engine Control Module (ECM) has detected a high voltage signal from the throttle position sensor or switch.
3. What are the possible causes of OBDII code P0123 on a 2005 Nissan Altima Sedan?
- The potential causes of code P0123 include a faulty throttle position sensor, damaged wiring or connectors, a malfunctioning ECM, or a stuck throttle.
4. How can I diagnose the Throttle Position Sensor/Switch issue causing code P0123 on my 2005 Nissan Altima Sedan?
- You can use a multimeter to test the throttle position sensor's voltage output, visually inspect the sensor and its wiring for any damage, and perform a thorough scan with an OBDII scanner for further diagnosis.
5. Can I still drive my 2005 Nissan Altima Sedan with OBDII code P0123?
- It is not recommended to drive the vehicle with code P0123, as it can lead to poor engine performance and potential safety hazards. It's best to address the issue promptly.
6. How can I repair OBDII code P0123 on my 2005 Nissan Altima Sedan?
- Repair options for code P0123 include replacing the throttle position sensor, repairing any damaged wiring or connectors, resetting the ECM, or cleaning a stuck throttle.
7. Will resetting the ECM clear OBDII code P0123 on a 2005 Nissan Altima Sedan?
- Resetting the ECM may temporarily clear the code, but if the underlying issue is not fixed, the code is likely to reappear after driving the vehicle for some time.
8. Can a DIY enthusiast fix OBDII code P0123 on a 2005 Nissan Altima Sedan?
- Depending on your skill level and access to tools, DIY enthusiasts can attempt to fix code P0123 by following repair guides, but it's recommended to seek professional help if unsure.
9. Is it expensive to repair OBDII code P0123 on a 2005 Nissan Altima Sedan?
- The cost of repairing code P0123 can vary depending on the cause of the issue. Replacing a faulty throttle position sensor may be relatively affordable, while dealing with a damaged ECM can be more costly.
10. How can I prevent OBDII code P0123 from occurring on my 2005 Nissan Altima Sedan in the future?
- To prevent code P0123, it's important to perform regular maintenance on your vehicle, including checking the throttle position sensor, ensuring proper wiring connections, and addressing any issues promptly.
Discuss the causes and fixes for P0123 2005 Nissan Altima Sedan OBDII Code
Code P0123 2005 Nissan Altima Sedan comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
