P0123 2004 Nissan Maxima Code - Throttle Position Sensor/Switch '1' Circuit High Input
Quick Answer
The Throttle Position Sensor (TPS) responds to the accelerator pedal movement. Common causes include Faulty throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0123 2004 Nissan Maxima indicates Throttle Position Sensor/Switch '1' Circuit High Input.
- Common causes
- Common causes include Faulty throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0123 2004 Nissan Maxima Description
Idle position of the throttle valve is determined by the ECM receiving the signal from the throttle position sensor. This sensor controls engine operation such as fuel cut. On the other hand, the Wide open and closed throttle position switch, which is built into the throttle position sensor unit, is not used for engine control.
What are the Possible Causes of the DTC P0123 2004 Nissan Maxima?
- Faulty throttle position sensor
- Throttle position sensor harness is open or shorted
- Throttle position sensor circuit poor electrical connection
How to Fix the DTC P0123 2004 Nissan Maxima?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0123 2004 Nissan Maxima code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0123 2004 Nissan Maxima code?
Need more information on how to fix the P0123 2004 Nissan Maxima code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0123 2004 Nissan Maxima code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0123 2004 Nissan Maxima Code
1. What are common symptoms of OBDII code P0123 in a 2004 Nissan Maxima?
Symptoms may include issues with acceleration, rough idling, stalling, poor fuel economy, and the vehicle going into "limp mode."
2. What does the OBDII code P0123 indicate in a 2004 Nissan Maxima?
Code P0123 points to an issue with the Throttle Position Sensor/Switch '1' Circuit, specifically indicating a high input signal from the sensor.
3. What are possible causes of OBDII code P0123 in a 2004 Nissan Maxima?
Potential causes can include a faulty throttle position sensor, damaged wiring or connectors in the circuit, a defective PCM, or a misaligned throttle position sensor.
4. How can I diagnose the Throttle Position Sensor/Switch '1' Circuit issue in my 2004 Nissan Maxima?
You can use a multimeter to test the throttle position sensor's voltage output, inspect the wiring and connectors for any damage, and check for proper sensor alignment.
5. Can I drive my 2004 Nissan Maxima with OBDII code P0123?
It is not recommended to drive the vehicle with this code present, as it can lead to poor performance and potential safety hazards due to erratic throttle response.
6. How can I repair OBDII code P0123 in my 2004 Nissan Maxima?
Repair options include replacing the throttle position sensor, repairing any damaged wiring or connectors, realigning the sensor, or seeking professional help for further diagnosis.
7. Is it safe to reset the OBDII code P0123 in a 2004 Nissan Maxima?
While you can reset the code using an OBDII scanner, it is important to address the underlying issue causing the code to prevent it from reoccurring.
8. Will OBDII code P0123 cause my 2004 Nissan Maxima to fail an emissions test?
Yes, having this code present can cause your vehicle to fail an emissions test due to the impact it has on engine performance and emissions control systems.
9. How much does it typically cost to repair OBDII code P0123 in a 2004 Nissan Maxima?
The cost of repair can vary depending on the specific cause of the issue, but it may range from $100 to $300 for parts and labor.
10. Can a DIY enthusiast fix OBDII code P0123 in a 2004 Nissan Maxima?
Depending on the individual's skill level and access to tools, DIY enthusiasts may be able to address this issue by following repair guides and using proper diagnostic equipment.
Discuss the causes and fixes for P0123 2004 Nissan Maxima OBDII Code
Code P0123 2004 Nissan Maxima comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
