P0122 2005 Toyota Prius Code - Throttle Position Sensor/Switch 'A' Circuit Low Input
Quick Answer
The Throttle Pedal Position (TPP) responds to the accelerator pedal movement. Common causes include Faulty throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0122 2005 Toyota Prius indicates Throttle Position Sensor/Switch 'A' Circuit Low Input.
- Common causes
- Common causes include Faulty throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0122 2005 Toyota Prius Description
Idle position of the throttle valve is determined by the ECM receiving the signal from the throttle position sensor. This sensor controls engine operation such as fuel cut. On the other hand, the Wide open and closed throttle position switch, which is built into the throttle position sensor unit, is not used for engine control.
What are the Possible Causes of the DTC P0122 2005 Toyota Prius?
- Faulty throttle position sensor
- Throttle position sensor harness is open or shorted
- Throttle position sensor circuit poor electrical connection
How to Fix the DTC P0122 2005 Toyota Prius?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0122 2005 Toyota Prius code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0122 2005 Toyota Prius code?
Need more information on how to fix the P0122 2005 Toyota Prius code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0122 2005 Toyota Prius code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0122 2005 Toyota Prius Code
1. What are the common symptoms of OBDII code P0122 in a 2005 Toyota Prius?
The common symptoms of OBDII code P0122 in a 2005 Toyota Prius may include reduced engine power, hesitation or stalling while driving, and an illuminated check engine light.
2. What does the OBDII code P0122 mean for a 2005 Toyota Prius?
OBDII code P0122 for a 2005 Toyota Prius indicates a Throttle Position Sensor/Switch 'A' Circuit Low Input, meaning that the signal from the throttle position sensor is lower than the expected range.
3. What are the possible causes of OBDII code P0122 in a 2005 Toyota Prius?
The possible causes of OBDII code P0122 in a 2005 Toyota Prius include a faulty throttle position sensor, a damaged or loose wiring harness, a malfunctioning throttle body, or a problem with the engine control module.
4. How can I diagnose the OBDII code P0122 in my 2005 Toyota Prius?
To diagnose OBDII code P0122 in a 2005 Toyota Prius, you can use an OBDII scanner to retrieve the code and then inspect the throttle position sensor, wiring connections, and throttle body for any signs of damage or malfunction.
5. Can I drive my 2005 Toyota Prius with OBDII code P0122?
It is not recommended to drive your 2005 Toyota Prius with OBDII code P0122, as it can lead to poor engine performance, potential stalling, and other safety hazards. It is best to address the issue promptly.
6. How can I repair OBDII code P0122 in my 2005 Toyota Prius?
To repair OBDII code P0122 in a 2005 Toyota Prius, you may need to replace the throttle position sensor, repair or replace any damaged wiring, clean the throttle body, or reprogram the engine control module.
7. Is it safe to reset the check engine light after fixing OBDII code P0122 in my 2005 Toyota Prius?
Yes, it is safe to reset the check engine light after fixing OBDII code P0122 in your 2005 Toyota Prius. This can be done using an OBDII scanner to clear the code and turn off the light.
8. Can a DIY enthusiast fix OBDII code P0122 in a 2005 Toyota Prius?
A DIY enthusiast with some automotive repair experience may be able to fix OBDII code P0122 in a 2005 Toyota Prius by following repair guides and using the necessary tools. However, if unsure, it is best to consult a professional mechanic.
9. How long does it typically take to repair OBDII code P0122 in a 2005 Toyota Prius?
The time it takes to repair OBDII code P0122 in a 2005 Toyota Prius can vary depending on the specific cause of the issue and the repair process involved. It may take anywhere from a few hours to a full day.
10. Will fixing OBDII code P0122 improve the performance of my 2005 Toyota Prius?
Yes, fixing OBDII code P0122 in your 2005 Toyota Prius should improve engine performance, reduce stalling or hesitation issues, and help maintain the overall functionality of the vehicle.
Discuss the causes and fixes for P0122 2005 Toyota Prius OBDII Code
Code P0122 2005 Toyota Prius comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
