P0122 2004 Toyota Prius Code - Throttle Position Sensor/Switch 'A' Circuit Low Input
Quick Answer
The Throttle Pedal Position (TPP) responds to the accelerator pedal movement. Common causes include Faulty throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0122 2004 Toyota Prius indicates Throttle Position Sensor/Switch 'A' Circuit Low Input.
- Common causes
- Common causes include Faulty throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0122 2004 Toyota Prius Description
Idle position of the throttle valve is determined by the ECM receiving the signal from the throttle position sensor. This sensor controls engine operation such as fuel cut. On the other hand, the Wide open and closed throttle position switch, which is built into the throttle position sensor unit, is not used for engine control.
What are the Possible Causes of the DTC P0122 2004 Toyota Prius?
- Faulty throttle position sensor
- Throttle position sensor harness is open or shorted
- Throttle position sensor circuit poor electrical connection
How to Fix the DTC P0122 2004 Toyota Prius?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0122 2004 Toyota Prius code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0122 2004 Toyota Prius code?
Need more information on how to fix the P0122 2004 Toyota Prius code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0122 2004 Toyota Prius code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0122 2004 Toyota Prius Code
1. What are the common symptoms of OBDII code P0122 on a 2004 Toyota Prius?
- Common symptoms include poor acceleration, hesitation, stalling, and potential issues with the vehicle's fuel economy.
2. What causes the Throttle Position Sensor/Switch 'A' Circuit Low Input code (P0122) on a 2004 Toyota Prius?
- The code P0122 is usually triggered by a faulty throttle position sensor, damaged wiring, or a poor electrical connection in the circuit.
3. How can I diagnose the Throttle Position Sensor/Switch 'A' Circuit Low Input code on my 2004 Toyota Prius?
- You can diagnose the issue by using an OBDII scanner to read the code, checking the throttle position sensor's voltage, and inspecting the wiring for any damage.
4. Can I drive my 2004 Toyota Prius with the P0122 code?
- It is not recommended to drive your Prius with the P0122 code as it can lead to poor performance and potential safety hazards. It is best to address the issue promptly.
5. Will resetting the OBDII code P0122 on my 2004 Toyota Prius make it go away permanently?
- Resetting the code may temporarily turn off the check engine light, but if the underlying issue is not fixed, the code is likely to reappear.
6. How much does it typically cost to repair the Throttle Position Sensor/Switch 'A' Circuit Low Input code on a 2004 Toyota Prius?
- The cost of repair can vary depending on the exact cause of the issue, but it may range from $100 to $300 for parts and labor.
7. Can a DIY enthusiast replace the throttle position sensor on a 2004 Toyota Prius to address code P0122?
- Yes, replacing the throttle position sensor can be done by a DIY enthusiast with some mechanical knowledge and the right tools. However, proper diagnosis is recommended before replacing any parts.
8. What are some tips for preventing the recurrence of the P0122 code on a 2004 Toyota Prius?
- To prevent the code from reappearing, ensure proper installation of the new throttle position sensor, regularly inspect the wiring for damage, and keep up with routine maintenance.
9. Is it safe to continue driving my 2004 Toyota Prius if the throttle position sensor needs to be replaced?
- It is not recommended to drive the Prius with a faulty throttle position sensor as it can lead to erratic acceleration and potentially unsafe driving conditions.
10. How long does it take to replace the throttle position sensor on a 2004 Toyota Prius to fix code P0122?
- The replacement of the throttle position sensor typically takes around 1-2 hours, but it may vary based on the skill level of the person performing the repair.
Discuss the causes and fixes for P0122 2004 Toyota Prius OBDII Code
Code P0122 2004 Toyota Prius comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
