P0122 2004 Toyota Highlander Code - Throttle Position Sensor/Switch 'A' Circuit Low Input
Quick Answer
The Throttle Pedal Position (TPP) responds to the accelerator pedal movement. Common causes include Faulty throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0122 2004 Toyota Highlander indicates Throttle Position Sensor/Switch 'A' Circuit Low Input.
- Common causes
- Common causes include Faulty throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0122 2004 Toyota Highlander Description
Idle position of the throttle valve is determined by the ECM receiving the signal from the throttle position sensor. This sensor controls engine operation such as fuel cut. On the other hand, the Wide open and closed throttle position switch, which is built into the throttle position sensor unit, is not used for engine control.
What are the Possible Causes of the DTC P0122 2004 Toyota Highlander?
- Faulty throttle position sensor
- Throttle position sensor harness is open or shorted
- Throttle position sensor circuit poor electrical connection
How to Fix the DTC P0122 2004 Toyota Highlander?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0122 2004 Toyota Highlander code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0122 2004 Toyota Highlander code?
Need more information on how to fix the P0122 2004 Toyota Highlander code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0122 2004 Toyota Highlander code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0122 2004 Toyota Highlander Code
1. What are the common symptoms of OBDII code P0122 in a 2004 Toyota Highlander?
The common symptoms of OBDII code P0122 in a 2004 Toyota Highlander include poor acceleration, rough idling, stalling, and possible difficulty shifting gears.
2. What does the OBDII code P0122 for a 2004 Toyota Highlander indicate?
The OBDII code P0122 for a 2004 Toyota Highlander indicates an issue with the Throttle Position Sensor/Switch 'A' Circuit Low Input.
3. What are the possible causes of OBDII code P0122 in a 2004 Toyota Highlander?
Possible causes of OBDII code P0122 in a 2004 Toyota Highlander include a faulty throttle position sensor, damaged wiring or connectors, or issues with the throttle body itself.
4. How can I diagnose the Throttle Position Sensor/Switch 'A' Circuit Low Input issue in my 2004 Toyota Highlander?
To diagnose the Throttle Position Sensor/Switch 'A' Circuit Low Input issue in a 2004 Toyota Highlander, you can use an OBDII scanner to read the trouble code, visually inspect the throttle position sensor and its wiring, and perform a voltage test on the sensor.
5. Can I still drive my 2004 Toyota Highlander with OBDII code P0122?
It is not recommended to drive your 2004 Toyota Highlander with OBDII code P0122, as it can lead to further damage to the engine and other components. It's best to address the issue promptly.
6. How can I repair OBDII code P0122 in my 2004 Toyota Highlander?
To repair OBDII code P0122 in a 2004 Toyota Highlander, you may need to replace the throttle position sensor, repair any damaged wiring or connectors, or clean the throttle body as needed.
7. Will resetting the OBDII code P0122 in my 2004 Toyota Highlander make it go away permanently?
Resetting the OBDII code P0122 in a 2004 Toyota Highlander may temporarily clear the code, but if the underlying issue is not addressed, the code is likely to reappear. It's important to diagnose and repair the root cause of the problem.
8. How much does it typically cost to fix OBDII code P0122 in a 2004 Toyota Highlander?
The cost to fix OBDII code P0122 in a 2004 Toyota Highlander can vary depending on the root cause of the issue, but it may range from $100 to $300 for parts and labor.
9. Can a DIY enthusiast repair OBDII code P0122 in a 2004 Toyota Highlander?
A DIY enthusiast with the right tools and knowledge may be able to repair OBDII code P0122 in a 2004 Toyota Highlander by replacing the throttle position sensor or repairing wiring issues. However, if unsure, it's best to seek professional help.
10. How often does OBDII code P0122 occur in a 2004 Toyota Highlander?
OBDII code P0122, indicating an issue with the Throttle Position Sensor/Switch 'A' Circuit Low Input, can occur occasionally in a 2004 Toyota Highlander due to sensor wear, wiring issues, or other factors affecting the throttle system.
Discuss the causes and fixes for P0122 2004 Toyota Highlander OBDII Code
Code P0122 2004 Toyota Highlander comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
