P0122 2004 Nissan Altima Sedan Code - Throttle Position Sensor/Switch '1' Circuit Low Input
Quick Answer
The Throttle Pedal Position (TPP) responds to the accelerator pedal movement. Common causes include Faulty throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0122 2004 Nissan Altima Sedan indicates Throttle Position Sensor/Switch '1' Circuit Low Input.
- Common causes
- Common causes include Faulty throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0122 2004 Nissan Altima Sedan Description
Idle position of the throttle valve is determined by the ECM receiving the signal from the throttle position sensor. This sensor controls engine operation such as fuel cut. On the other hand, the Wide open and closed throttle position switch, which is built into the throttle position sensor unit, is not used for engine control.
What are the Possible Causes of the DTC P0122 2004 Nissan Altima Sedan?
- Faulty throttle position sensor.
- Throttle position sensor harness is open or shorted
- Throttle position sensor circuit poor electrical connection
- Faulty accelerator pedal position sensor
How to Fix the DTC P0122 2004 Nissan Altima Sedan?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0122 2004 Nissan Altima Sedan code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0122 2004 Nissan Altima Sedan code?
Need more information on how to fix the P0122 2004 Nissan Altima Sedan code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0122 2004 Nissan Altima Sedan code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0122 2004 Nissan Altima Sedan Code
1. What are the common symptoms of OBDII code P0122 in a 2004 Nissan Altima Sedan?
The common symptoms of code P0122 in a 2004 Nissan Altima Sedan include poor acceleration, stalling, rough idling, and potential issues with the transmission shifting.
2. What does the OBDII code P0122 indicate in a 2004 Nissan Altima Sedan?
Code P0122 indicates a low input from the throttle position sensor or switch '1' circuit in the 2004 Nissan Altima Sedan, signaling a potential issue with the throttle position sensor.
3. What are the possible causes of OBDII code P0122 in a 2004 Nissan Altima Sedan?
Possible causes of code P0122 in a 2004 Nissan Altima Sedan include a faulty throttle position sensor, damaged wiring or connectors in the throttle position sensor circuit, or a problem with the engine control module (ECM).
4. How can I diagnose the OBDII code P0122 in my 2004 Nissan Altima Sedan?
Diagnosing code P0122 involves using an OBDII scanner to retrieve the code, checking the throttle position sensor's wiring and connectors for damage, and testing the sensor's voltage output using a multimeter.
5. Can I drive my 2004 Nissan Altima Sedan with OBDII code P0122?
It is not recommended to drive your 2004 Nissan Altima Sedan with OBDII code P0122, as it can lead to poor engine performance, potential stalling, and other safety hazards on the road.
6. How can I repair OBDII code P0122 in my 2004 Nissan Altima Sedan?
To repair code P0122, you may need to replace the throttle position sensor, repair damaged wiring or connectors in the sensor circuit, or reprogram the engine control module (ECM) if necessary.
7. Is it possible to reset OBDII code P0122 in a 2004 Nissan Altima Sedan?
While you can clear the code temporarily with an OBDII scanner, it is important to address the underlying issue causing code P0122 to prevent it from recurring in your 2004 Nissan Altima Sedan.
8. How much does it cost to fix OBDII code P0122 in a 2004 Nissan Altima Sedan?
The cost of fixing code P0122 in a 2004 Nissan Altima Sedan can vary depending on the root cause of the issue, but it may range from $100 to $300 for parts and labor.
9. Can a DIY enthusiast repair OBDII code P0122 in a 2004 Nissan Altima Sedan?
If you have experience working on automotive electrical systems, you may be able to replace the throttle position sensor or repair wiring issues causing code P0122 in your 2004 Nissan Altima Sedan as a DIY project.
10. How often does OBDII code P0122 occur in a 2004 Nissan Altima Sedan?
Code P0122 can occur intermittently or persistently in a 2004 Nissan Altima Sedan, depending on the severity of the issue with the throttle position sensor or circuit. Regular maintenance and prompt repairs can help prevent its recurrence.
Discuss the causes and fixes for P0122 2004 Nissan Altima Sedan OBDII Code
Code P0122 2004 Nissan Altima Sedan comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
