P0122 2003 Toyota Corolla Code - Throttle Position Sensor/Switch 'A' Circuit Low Input 3ZZ-FE Engine
Quick Answer
The Throttle Pedal Position (TPP) responds to the accelerator pedal movement. Common causes include Faulty throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0122 2003 Toyota Corolla indicates Throttle Position Sensor/Switch 'A' Circuit Low Input 3ZZ-FE Engine.
- Common causes
- Common causes include Faulty throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0122 2003 Toyota Corolla Description
Idle position of the throttle valve is determined by the ECM receiving the signal from the throttle position sensor. This sensor controls engine operation such as fuel cut. On the other hand, the Wide open and closed throttle position switch, which is built into the throttle position sensor unit, is not used for engine control.
What are the Possible Causes of the DTC P0122 2003 Toyota Corolla?
- Faulty throttle position sensor.
- Throttle position sensor harness is open or shorted
- Throttle position sensor circuit poor electrical connection
How to Fix the DTC P0122 2003 Toyota Corolla?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0122 2003 Toyota Corolla code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0122 2003 Toyota Corolla code?
Need more information on how to fix the P0122 2003 Toyota Corolla code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0122 2003 Toyota Corolla code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0122 2003 Toyota Corolla Code
1. What are the common symptoms of OBDII code P0122 in a 2003 Toyota Corolla with a 3ZZ-FE engine?
- Common symptoms include reduced engine power, poor acceleration, stalling, and the vehicle going into "limp mode."
2. What are the possible causes of the Throttle Position Sensor/Switch 'A' Circuit Low Input code in a Toyota Corolla?
- Possible causes include a faulty throttle position sensor, damaged wiring or connectors, poor electrical connection, or a problem with the engine control module.
3. How can I diagnose the root cause of the P0122 code in my 2003 Toyota Corolla?
- You can use a multimeter to test the throttle position sensor's voltage output, check for any damaged wiring or connectors, and verify the integrity of the electrical connections.
4. Can a dirty throttle body cause the P0122 code to trigger in a Toyota Corolla?
- Yes, a dirty throttle body can disrupt the proper operation of the throttle position sensor, leading to a low input signal and triggering the P0122 code.
5. Is it safe to continue driving my Toyota Corolla with the P0122 code present?
- It is not recommended to drive your vehicle with the P0122 code present, as it can lead to further engine performance issues and potential safety hazards.
6. What are some repair tips for resolving the Throttle Position Sensor/Switch 'A' Circuit Low Input code in a Toyota Corolla?
- Start by inspecting the throttle position sensor and its wiring for any visible damage. Clean the throttle body and connectors, and if necessary, replace the throttle position sensor.
7. Can resetting the OBDII system clear the P0122 code temporarily?
- Resetting the OBDII system may temporarily clear the P0122 code, but if the underlying issue is not addressed, the code is likely to reappear.
8. How much does it typically cost to repair the Throttle Position Sensor/Switch 'A' Circuit Low Input code in a Toyota Corolla?
- The cost of repair can vary depending on the exact cause of the code, but it may range from $100 to $300 for parts and labor.
9. Will a P0122 code cause my Toyota Corolla to fail an emissions test?
- Yes, a P0122 code can cause your vehicle to fail an emissions test due to its impact on engine performance and emissions control systems.
10. Can I fix the P0122 code in my Toyota Corolla myself, or do I need to take it to a professional mechanic?
- Depending on your level of automotive experience, you may be able to diagnose and repair the P0122 code yourself by following the manufacturer's repair manual. If unsure, it's recommended to consult a professional mechanic for assistance.
Discuss the causes and fixes for P0122 2003 Toyota Corolla OBDII Code
Code P0122 2003 Toyota Corolla comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
