P0118 2019 Honda CR-V Code - Engine Coolant Temperature Sensor 1 Circuit High Voltage
Quick Answer
The Engine Coolant Temperature (ECT) Sensor 1 is used for air/fuel ratio feedback control, ignition timing control, idle speed control, and other functions. Common causes include Faulty Engine Coolant Temperature (ECT) Sensor 1, Engine Coolant Temperature Sensor 1 harness is open or shorted, Engine Coolant Temperature Sensor 1 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0118 2019 Honda CR-V indicates Engine Coolant Temperature Sensor 1 Circuit High Voltage.
- Common causes
- Common causes include Faulty Engine Coolant Temperature (ECT) Sensor 1, Engine Coolant Temperature Sensor 1 harness is open or shorted, Engine Coolant Temperature Sensor 1 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0118 2019 Honda CR-V Description
What are the Possible Causes of the DTC P0118 2019 Honda CR-V?
- Faulty Engine Coolant Temperature (ECT) Sensor 1
- Engine Coolant Temperature Sensor 1 harness is open or shorted
- Engine Coolant Temperature Sensor 1 circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC P0118 2019 Honda CR-V?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0118 2019 Honda CR-V code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0118 2019 Honda CR-V code?
Need more information on how to fix the P0118 2019 Honda CR-V code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0118 2019 Honda CR-V code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0118 2019 Honda CR-V Code
1. What are the common symptoms of OBDII code P0118 in a 2019 Honda CR-V?
The common symptoms of OBDII code P0118 in a 2019 Honda CR-V include the engine running hotter than normal, the temperature gauge showing inaccurate readings, and the Check Engine light illuminating on the dashboard.
2. What does the OBDII code P0118 "Engine Coolant Temperature Sensor 1 Circuit High Voltage" mean in a 2019 Honda CR-V?
The OBDII code P0118 in a 2019 Honda CR-V indicates that the Engine Coolant Temperature Sensor 1 is reporting a high voltage signal to the Engine Control Module (ECM), suggesting a potential issue with the sensor or its circuit.
3. What are the possible causes of OBDII code P0118 in a 2019 Honda CR-V?
Possible causes of OBDII code P0118 in a 2019 Honda CR-V include a faulty Engine Coolant Temperature Sensor, a short or open circuit in the sensor's wiring, a corroded connector, or issues with the ECM.
4. How can I diagnose the OBDII code P0118 in my 2019 Honda CR-V?
To diagnose OBDII code P0118 in a 2019 Honda CR-V, you can use an OBDII scanner to read the code and monitor the engine coolant temperature sensor's readings. Additionally, check the sensor's wiring and connector for any visible damage.
5. Can I continue driving my 2019 Honda CR-V with OBDII code P0118?
It is not recommended to continue driving your 2019 Honda CR-V with OBDII code P0118, as it can lead to potential engine overheating and damage. It is best to address the issue promptly to avoid further complications.
6. How can I repair OBDII code P0118 in my 2019 Honda CR-V?
To repair OBDII code P0118 in a 2019 Honda CR-V, you may need to replace the Engine Coolant Temperature Sensor if it is faulty. Ensure the sensor's wiring and connector are in good condition, and clear the code using an OBDII scanner after the repair.
7. Is it possible to reset the OBDII code P0118 in my 2019 Honda CR-V without fixing the issue?
While you can clear the OBDII code P0118 in a 2019 Honda CR-V using an OBDII scanner, it is crucial to fix the underlying issue causing the code to prevent future problems with engine coolant temperature monitoring.
8. How much does it cost to repair OBDII code P0118 in a 2019 Honda CR-V?
The cost to repair OBDII code P0118 in a 2019 Honda CR-V can vary depending on the cause of the issue. Replacing the Engine Coolant Temperature Sensor or repairing the wiring may cost anywhere from $50 to $200, including parts and labor.
9. Can a DIY enthusiast fix OBDII code P0118 in a 2019 Honda CR-V?
If you have experience with automotive repairs and access to the necessary tools, you may be able to fix OBDII code P0118 in a 2019 Honda CR-V as a DIY project. However, it is essential to follow the manufacturer's guidelines and safety precautions.
10. How often does OBDII code P0118 occur in a 2019 Honda CR-V?
OBDII code P0118, indicating an issue with the Engine Coolant Temperature Sensor circuit's high voltage, can occur sporadically in a 2019 Honda CR-V due to sensor malfunctions, wiring problems, or ECM issues. Regular maintenance and monitoring can help prevent this code from recurring frequently.
Discuss the causes and fixes for P0118 2019 Honda CR-V OBDII Code
Code P0118 2019 Honda CR-V comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
