Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
If the coolant level is not low and thermostat is not stuck open or closed replacing the Engine Coolant Temperature (ECT) sensor should take care of the problem.
The cost of diagnosing the P0118 2008 Nissan Rogue code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
An excessively high voltage from the sensor is sent to ECM.
The Engine Coolant Temperature (ECT) sensor is used to detect the engine coolant temperature. The sensor modifies a voltage signal from the Engine Control Module (ECM). The modified signal returns to the ECM as the engine coolant temperature input. The sensor uses a thermistor which is sensitive to the change in temperature. The electrical resistance of the thermistor decreases as temperature increases.
Need more information on how to fix the P0118 2008 Nissan Rogue code? Get Access to Factory Service Manuals
Get the P0118 2008 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area
Help us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the P0118 2008 Nissan Rogue code? Have you replaced any parts?
Any information is appreciated. Thanks