P0114 2015 Chevrolet Silverado Code - Intake Air Temperature Circuit Intermittent
Quick Answer
The intake air temperature (IAT) sensor 1 is a variable resistor that measures the temperature of the air in the sensor bore. Common causes include Dirty air filter, Faulty Intake Air Temperature (IAT) Sensor, Intake Air Temperature Sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0114 2015 Chevrolet Silverado indicates Intake Air Temperature Circuit Intermittent.
- Common causes
- Common causes include Dirty air filter, Faulty Intake Air Temperature (IAT) Sensor, Intake Air Temperature Sensor harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0114 2015 Chevrolet Silverado Description
What are the Possible Causes of the DTC P0114 2015 Chevrolet Silverado?
- Dirty air filter
- Faulty Intake Air Temperature (IAT) Sensor
- Intake Air Temperature Sensor harness is open or shorted
- Intake Air Temperature Sensor circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0114 2015 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0114 2015 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0114 2015 Chevrolet Silverado code?
Need more information on how to fix the P0114 2015 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0114 2015 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0114 2015 Chevrolet Silverado Code
1. What does the OBDII code P0114 mean on a 2015 Chevrolet Silverado?
P0114 indicates an intermittent issue with the Intake Air Temperature (IAT) sensor circuit, meaning the signal is erratic or inconsistent.
2. What are the symptoms of a P0114 code in a 2015 Chevrolet Silverado?
Symptoms may include a check engine light, rough engine performance, poor fuel economy, or difficulty starting the vehicle.
3. What causes the P0114 code to appear on a 2015 Chevrolet Silverado?
Common causes include a faulty IAT sensor, damaged wiring or connectors, a dirty air filter, or issues with the engine control module (ECM).
4. Where is the Intake Air Temperature (IAT) sensor located on a 2015 Chevrolet Silverado?
The IAT sensor is typically located near the air intake or within the mass airflow (MAF) sensor housing.
5. Can I drive my 2015 Chevrolet Silverado with a P0114 code?
While it may still be drivable, driving with a P0114 code can reduce fuel efficiency and may affect engine performance over time.
6. How do I diagnose the P0114 code on my 2015 Chevrolet Silverado?
Diagnose the issue by inspecting the IAT sensor, checking for damaged wiring or loose connections, and using a multimeter to test the sensor's resistance.
7. How do I fix the P0114 code on a 2015 Chevrolet Silverado?
Repairs may include replacing the IAT sensor, repairing damaged wiring, cleaning the air filter, or updating the ECM software if necessary.
8. Does a dirty air filter cause a P0114 code in a 2015 Chevrolet Silverado?
Yes, a dirty air filter can restrict airflow and potentially contribute to sensor issues, leading to a P0114 code.
9. What tools are needed to fix the P0114 code on a 2015 Chevrolet Silverado?
You may need a multimeter, a scan tool, basic hand tools, and possibly a replacement IAT sensor or wiring components.
10. How much does it cost to fix the P0114 code on a 2015 Chevrolet Silverado?
The repair cost depends on the issue, but replacing an IAT sensor typically costs $50–$150, while labor may add $50–$100.
Discuss the causes and fixes for P0114 2015 Chevrolet Silverado OBDII Code
Code P0114 2015 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
