P0114 2010 Ford Fusion Code - Intake Air Temperature Sensor 1 Intermittent Or Erratic
Quick Answer
The Intake Air Temperature (IAT) sensor is built into Mass Air Flow (MAF) sensor. Common causes include Dirty Air Filter, Faulty Intake Air Temperature (IAT) Sensor, Intake Air Temperature Sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0114 2010 Ford Fusion indicates Intake Air Temperature Sensor 1 Intermittent Or Erratic.
- Common causes
- Common causes include Dirty Air Filter, Faulty Intake Air Temperature (IAT) Sensor, Intake Air Temperature Sensor harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0114 2010 Ford Fusion Description
What are the Possible Causes of the DTC P0114 2010 Ford Fusion?
- Dirty Air Filter
- Faulty Intake Air Temperature (IAT) Sensor
- Intake Air Temperature Sensor harness is open or shorted
- Intake Air Temperature Sensor circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC P0114 2010 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0114 2010 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0114 2010 Ford Fusion code?
Need more information on how to fix the P0114 2010 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0114 2010 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0114 2010 Ford Fusion Code
1. What does the OBDII code P0114 mean on a 2010 Ford Fusion?
P0114 indicates that the Intake Air Temperature (IAT) Sensor 1 is sending intermittent or erratic signals to the engine control module (ECM).
2. What are the common symptoms of a P0114 code on a 2010 Ford Fusion?
Symptoms may include poor fuel economy, rough idling, difficulty starting the engine, reduced power, and an illuminated check engine light.
3. What causes the P0114 code to appear on a 2010 Ford Fusion?
Common causes include a faulty IAT sensor, damaged wiring or connectors to the sensor, a dirty or contaminated sensor, or issues with the ECM.
4. Can I still drive my 2010 Ford Fusion with a P0114 code?
While the car might still be drivable, it could experience reduced performance or fuel efficiency. Prolonged driving without addressing the issue could lead to additional engine problems.
5. How do I diagnose the P0114 code on a 2010 Ford Fusion?
Start by using an OBDII scanner to confirm the code. Then inspect the IAT sensor, wiring, and connectors for damage or corrosion. Verify sensor readings with a multimeter if necessary.
6. How do I fix the P0114 code on a 2010 Ford Fusion?
Repairs may include cleaning or replacing the IAT sensor, repairing or replacing damaged wiring or connectors, or updating or reprogramming the ECM if needed.
7. Where is the Intake Air Temperature Sensor located on a 2010 Ford Fusion?
The IAT sensor is typically located on or near the intake manifold or integrated into the mass air flow (MAF) sensor housing.
8. What tools are needed to fix a P0114 code on a 2010 Ford Fusion?
You may need an OBDII scanner, a multimeter, basic hand tools, and electrical contact cleaner to troubleshoot and address the issue.
9. How much does it cost to fix a P0114 code on a 2010 Ford Fusion?
The cost can vary, but replacing the IAT sensor typically costs between $50 and $150 for parts and labor. Wiring repairs may add to the total.
10. Can a dirty air filter trigger the P0114 code on a 2010 Ford Fusion?
While unlikely, a severely clogged air filter might affect airflow and sensor readings. It’s a good idea to check and replace the air filter if needed.
Discuss the causes and fixes for P0114 2010 Ford Fusion OBDII Code
Code P0114 2010 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
