AutoCodes – MINI – P0113 MINI

P0113 MINI Code - Intake Air Temperature Sensor 1 Circuit High Bank 1

Quick Answer

The Intake Air Temperature (IAT) sensor is built into mass air flow sensor or in some vehicles mounted to the air filter duct housing. Common causes include Faulty Intake Air Temperature (IAT) sensor, Dirty air filter, Intake Air Temperature (IAT) sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0113 MINI indicates Intake Air Temperature Sensor 1 Circuit High Bank 1.
Common causes: Common causes include Faulty Intake Air Temperature (IAT) sensor, Dirty air filter, Intake Air Temperature (IAT) sensor harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 8,528

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0113 MINI Description

The Intake Air Temperature (IAT) sensor is built into mass air flow sensor or in some vehicles mounted to the air filter duct housing. The sensor detects intake air temperature and transmits a signal to the Engine Control Module (ECM).The temperature sensing unit uses a thermistor which is sensitive to the change in temperature. Electrical resistance of the thermistor decreases in response to the temperature rise. The Intake Air Temperature signal is used as an input for various systems in the vehicle.

OBDII Code P0113 MINI - Intake Air Temperature Sensor 1 Circuit High Bank 1 - AutoCodes.com — P0113 MINI Code - Intake Air Temperature Sensor 1 Circuit High Bank 1

What does this mean?

What are the Possible Causes of the DTC P0113 MINI?

Faulty Intake Air Temperature (IAT) sensor
Dirty air filter
Intake Air Temperature (IAT) sensor harness is open or shorted
Intake Air Temperature (IAT) sensor circuit poor electrical connection

How to Fix the DTC P0113 MINI?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0113 MINI code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0113 MINI code?

Need more information on how to fix the P0113 MINI code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0113 MINI code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0113 MINI Code

1. What are the common symptoms of OBDII code P0113 in a MINI?

- Common symptoms include poor engine performance, rough idling, stalling, and decreased fuel efficiency.

2. What does the OBDII code P0113 in a MINI indicate?

- The code P0113 refers to a high voltage output from the Intake Air Temperature Sensor 1 in Bank 1 of the engine.

3. What are the possible causes of OBDII code P0113 in a MINI?

- Possible causes include a faulty intake air temperature sensor, damaged wiring or connectors, a disconnected sensor, or a problem with the sensor circuit.

4. How can I diagnose the issue causing code P0113 in my MINI?

- You can diagnose the issue by visually inspecting the sensor and its wiring, testing the sensor's resistance, checking for voltage at the sensor connector, and scanning for any additional related trouble codes.

5. Can I drive my MINI with OBDII code P0113?

- It is not recommended to drive your MINI with code P0113 as it can lead to poor engine performance and potential damage if left unaddressed.

6. How can I repair OBDII code P0113 in my MINI?

- Repair options include replacing the intake air temperature sensor, repairing damaged wiring or connectors, reattaching a disconnected sensor, or addressing any issues in the sensor circuit.

7. Is it possible to reset the OBDII code P0113 in a MINI without fixing the issue?

- While you can clear the code temporarily, it will likely reappear if the underlying issue causing the high voltage output from the sensor is not resolved.

8. How much does it cost to fix OBDII code P0113 in a MINI?

- The cost of fixing the P0113 code can vary depending on the specific issue, but it may involve replacing the sensor, repairing wiring, or addressing other related components.

9. Can a DIY enthusiast repair OBDII code P0113 in a MINI?

- Yes, DIY enthusiasts with the necessary tools and knowledge can often repair code P0113 by following repair guides or consulting with automotive resources.

10. How often does OBDII code P0113 occur in MINI vehicles?

- OBDII code P0113 can occur in MINI vehicles due to various factors, such as sensor wear, wiring issues, or environmental conditions, but it is not considered a common code in MINI vehicles.