P0113 2020 Honda CR-V Code - Intake Air Temperature Sensor 1 Circuit High Voltage
Quick Answer
The Intake Air Temperature (IAT) Sensor 1 is a thermistor that detects intake air temperature, and it is used for air/fuel ratio feedback control to compensate for the atmospheric density fluctuations that accompany changes in intake air temperature. Common causes include Faulty Intake Air Temperature (IAT) Sensor 1, Intake Air Temperature Sensor 1 harness is open or shorted, Intake Air Temperature Sensor 1 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0113 2020 Honda CR-V indicates Intake Air Temperature Sensor 1 Circuit High Voltage.
- Common causes
- Common causes include Faulty Intake Air Temperature (IAT) Sensor 1, Intake Air Temperature Sensor 1 harness is open or shorted, Intake Air Temperature Sensor 1 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0113 2020 Honda CR-V Description
What are the Possible Causes of the DTC P0113 2020 Honda CR-V?
- Faulty Intake Air Temperature (IAT) Sensor 1
- Intake Air Temperature Sensor 1 harness is open or shorted
- Intake Air Temperature Sensor 1 circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC P0113 2020 Honda CR-V?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0113 2020 Honda CR-V code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0113 2020 Honda CR-V code?
Need more information on how to fix the P0113 2020 Honda CR-V code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0113 2020 Honda CR-V code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0113 2020 Honda CR-V Code
1. What are the common symptoms of OBDII code P0113 on a 2020 Honda CR-V?
When the Intake Air Temperature Sensor 1 Circuit registers high voltage, you may experience issues like poor engine performance, rough idling, reduced fuel efficiency, or even stalling.
2. What causes the P0113 code to appear on a 2020 Honda CR-V?
The most common cause of the P0113 code in a 2020 Honda CR-V is a malfunctioning Intake Air Temperature (IAT) sensor, which can be due to a faulty sensor, damaged wiring, or a poor connection.
3. How can I diagnose the Intake Air Temperature Sensor 1 Circuit high voltage issue on my 2020 Honda CR-V?
To diagnose the P0113 code, start by visually inspecting the IAT sensor and its wiring for any signs of damage. You may also use a multimeter to test the sensor's resistance and voltage output to determine its functionality.
4. Can a dirty air filter trigger the P0113 code on a 2020 Honda CR-V?
Yes, a dirty or clogged air filter can disrupt the airflow to the Intake Air Temperature sensor, causing it to read incorrect values and potentially trigger the P0113 code.
5. How can I repair the Intake Air Temperature Sensor 1 Circuit high voltage issue on my 2020 Honda CR-V?
Depending on the root cause, you may need to replace the faulty IAT sensor, repair damaged wiring, or ensure a secure connection. Clearing the error code with an OBDII scanner after the repair is essential.
6. Is it safe to continue driving my 2020 Honda CR-V with the P0113 code present?
Continuing to drive with the P0113 code can potentially lead to further engine issues or decreased fuel efficiency. It's recommended to address the problem promptly to prevent any long-term damage.
7. Can extreme weather conditions affect the Intake Air Temperature Sensor and trigger the P0113 code?
Yes, extreme cold or hot weather conditions can impact the IAT sensor's readings, leading to a potential trigger of the P0113 code on a 2020 Honda CR-V.
8. Will resetting the ECU clear the P0113 code on my 2020 Honda CR-V?
Resetting the Engine Control Unit (ECU) may temporarily clear the P0113 code, but if the underlying issue with the Intake Air Temperature Sensor persists, the code is likely to reappear.
9. How much does it typically cost to repair the Intake Air Temperature Sensor 1 Circuit high voltage issue on a 2020 Honda CR-V?
The cost of repairing the P0113 code can vary depending on the exact cause. Replacing the IAT sensor itself can range from $50 to $150, while labor costs at a dealership or auto repair shop should also be factored in.
10. Can a DIY enthusiast fix the P0113 code on a 2020 Honda CR-V, or is it better left to professionals?
Depending on the individual's skill level and access to tools, some DIY enthusiasts may be able to address the P0113 code themselves by following repair guides or online tutorials. However, if unsure, it's always recommended to seek professional help to ensure the issue is properly diagnosed and resolved.
Discuss the causes and fixes for P0113 2020 Honda CR-V OBDII Code
Code P0113 2020 Honda CR-V comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
