P0113 2017 Toyota RAV4 Code - Intake Air Temperature Circuit High Input
Quick Answer
The Intake Air Temperature (IAT), mounted on the Mass Air Flow meter sub-assembly, monitors the intake air temperature. Common causes include Dirty air filter, Faulty Intake Air Temperature (IAT) Sensor (Part of the Mass Air Flow [MAF] Sensor), Intake Air Temperature sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0113 2017 Toyota RAV4 indicates Intake Air Temperature Circuit High Input.
- Common causes
- Common causes include Dirty air filter, Faulty Intake Air Temperature (IAT) Sensor (Part of the Mass Air Flow [MAF] Sensor), Intake Air Temperature sensor harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0113 2017 Toyota RAV4 Description
The ECM monitors the sensor voltage and uses this value to calculate the intake air temperature. When the sensor output voltage deviates from the normal operating range, the ECM interprets this as a malfunction in the intake air temperature sensor circuit and stores a Diagnostic Trouble Code (DTC).
What are the Possible Causes of the DTC P0113 2017 Toyota RAV4?
- Dirty air filter
- Faulty Intake Air Temperature (IAT) Sensor (Part of the Mass Air Flow [MAF] Sensor)
- Intake Air Temperature sensor harness is open or shorted
- Intake Air Temperature sensor circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0113 2017 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0113 2017 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0113 2017 Toyota RAV4 code?
Need more information on how to fix the P0113 2017 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0113 2017 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0113 2017 Toyota RAV4 Code
1. What are the common symptoms of OBDII code P0113 in a 2017 Toyota RAV4?
- Common symptoms include poor engine performance, rough idling, decreased fuel efficiency, and potential stalling.
2. What does the OBDII code P0113, Intake Air Temperature Circuit High Input, indicate in a 2017 Toyota RAV4?
- This code indicates that the Intake Air Temperature (IAT) sensor is reporting a higher than normal voltage input to the engine control module.
3. What are the possible causes of OBDII code P0113 in a 2017 Toyota RAV4?
- Possible causes include a faulty IAT sensor, damaged wiring or connectors in the IAT circuit, a vacuum leak near the sensor, or issues with the engine control module.
4. How can I diagnose the cause of OBDII code P0113 in my 2017 Toyota RAV4?
- You can diagnose the issue by visually inspecting the IAT sensor and its connections, testing the sensor's resistance, checking for vacuum leaks, and using a scan tool to monitor sensor data.
5. Can I continue driving my 2017 Toyota RAV4 with OBDII code P0113?
- It is not recommended to continue driving with this code active, as it can lead to further engine problems and decreased performance. It's best to address the issue promptly.
6. How can I repair OBDII code P0113 in my 2017 Toyota RAV4?
- To repair this code, you may need to replace the IAT sensor, repair or replace damaged wiring or connectors, fix any vacuum leaks, or reprogram the engine control module if necessary.
7. Will resetting the OBDII code P0113 in my 2017 Toyota RAV4 make it go away permanently?
- Resetting the code may temporarily clear the warning light, but if the underlying issue is not fixed, the code is likely to return once the problem is detected again.
8. Is it possible to prevent OBDII code P0113 from occurring in my 2017 Toyota RAV4?
- Regular maintenance, checking the IAT sensor and its connections for damage, and addressing any engine performance issues promptly can help prevent this code from occurring.
9. Can a DIY enthusiast fix OBDII code P0113 in a 2017 Toyota RAV4?
- Depending on your skills and tools, you may be able to address this code yourself by following repair guides, but if you are unsure, it's best to seek professional help.
10. How long does it typically take to repair OBDII code P0113 in a 2017 Toyota RAV4?
- The repair time can vary based on the exact cause of the code, but it may take anywhere from 30 minutes to a few hours to diagnose and fix the issue.
Discuss the causes and fixes for P0113 2017 Toyota RAV4 OBDII Code
Code P0113 2017 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
