P0113 2016 Honda CR-V Code - Intake Air Temperature Sensor 1 Circuit High Voltage
Quick Answer
The Intake Air Temperature (IAT) Sensor 1 is a thermistor that detects intake air temperature, and it is used for air/fuel ratio feedback control to compensate for the atmospheric density fluctuations that accompany changes in intake air temperature. Common causes include Faulty Intake Air Temperature (IAT) Sensor 1, Intake Air Temperature Sensor 1 harness is open or shorted, Intake Air Temperature Sensor 1 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0113 2016 Honda CR-V indicates Intake Air Temperature Sensor 1 Circuit High Voltage.
- Common causes
- Common causes include Faulty Intake Air Temperature (IAT) Sensor 1, Intake Air Temperature Sensor 1 harness is open or shorted, Intake Air Temperature Sensor 1 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0113 2016 Honda CR-V Description
What are the Possible Causes of the DTC P0113 2016 Honda CR-V?
- Faulty Intake Air Temperature (IAT) Sensor 1
- Intake Air Temperature Sensor 1 harness is open or shorted
- Intake Air Temperature Sensor 1 circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC P0113 2016 Honda CR-V?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0113 2016 Honda CR-V code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0113 2016 Honda CR-V code?
Need more information on how to fix the P0113 2016 Honda CR-V code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0113 2016 Honda CR-V code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0113 2016 Honda CR-V Code
1. What are the common symptoms of OBDII code P0113 on a 2016 Honda CR-V?
- Common symptoms include poor engine performance, rough idling, decreased fuel efficiency, and potential stalling.
2. What does the OBDII code P0113 in a 2016 Honda CR-V indicate?
- This code specifically points to an issue with the Intake Air Temperature Sensor 1 Circuit registering higher than expected voltage.
3. What are the possible causes of the Intake Air Temperature Sensor 1 Circuit high voltage issue on a 2016 Honda CR-V?
- Potential causes include a faulty intake air temperature sensor, damaged wiring or connectors, issues with the sensor's circuit, or a problem with the engine control module.
4. How can I diagnose the cause of OBDII code P0113 on my 2016 Honda CR-V?
- To diagnose the issue, you may need to visually inspect the sensor and its wiring, perform electrical tests, check for continuity, and potentially use a multimeter to measure voltage.
5. Can I drive my 2016 Honda CR-V with OBDII code P0113?
- While the vehicle may still be operational with this code, it is advisable to address the issue promptly to prevent potential engine performance problems and further damage.
6. How do I repair the Intake Air Temperature Sensor 1 Circuit high voltage problem on my 2016 Honda CR-V?
- Repairing this issue typically involves replacing the faulty intake air temperature sensor, repairing any damaged wiring or connectors, and resetting the trouble codes.
7. Is it possible to reset the OBDII code P0113 on a 2016 Honda CR-V without fixing the underlying issue?
- While you can clear the code using an OBDII scanner, it is crucial to address the root cause to prevent recurring problems and ensure optimal engine performance.
8. Are there any DIY tips for troubleshooting OBDII code P0113 on a 2016 Honda CR-V?
- DIY tips may include checking the sensor's connector for corrosion, ensuring proper sensor installation, and inspecting the sensor's wiring for any visible damage.
9. Will fixing the Intake Air Temperature Sensor 1 Circuit high voltage problem improve my 2016 Honda CR-V's fuel efficiency?
- Yes, addressing this issue can potentially improve fuel efficiency by allowing the engine to receive accurate temperature readings for optimal performance.
10. Can a professional mechanic help diagnose and repair OBDII code P0113 on a 2016 Honda CR-V?
- Yes, a certified mechanic can perform in-depth diagnostics, accurately identify the issue, and efficiently repair the Intake Air Temperature Sensor 1 Circuit high voltage problem to restore your vehicle's performance.
Discuss the causes and fixes for P0113 2016 Honda CR-V OBDII Code
Code P0113 2016 Honda CR-V comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
