P0113 2013 Toyota RAV4 Code - Intake Air Temperature Circuit High Input
Quick Answer
The Intake Air Temperature (IAT), mounted on the Mass Air Flow meter sub-assembly, monitors the intake air temperature. Common causes include Dirty air filter, Faulty Intake Air Temperature (IAT) Sensor (Part of the Mass Air Flow [MAF] Sensor), Intake Air Temperature sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0113 2013 Toyota RAV4 indicates Intake Air Temperature Circuit High Input.
- Common causes
- Common causes include Dirty air filter, Faulty Intake Air Temperature (IAT) Sensor (Part of the Mass Air Flow [MAF] Sensor), Intake Air Temperature sensor harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0113 2013 Toyota RAV4 Description
The ECM monitors the sensor voltage and uses this value to calculate the intake air temperature. When the sensor output voltage deviates from the normal operating range, the ECM interprets this as a malfunction in the intake air temperature sensor circuit and stores a Diagnostic Trouble Code (DTC).
What are the Possible Causes of the DTC P0113 2013 Toyota RAV4?
- Dirty air filter
- Faulty Intake Air Temperature (IAT) Sensor (Part of the Mass Air Flow [MAF] Sensor)
- Intake Air Temperature sensor harness is open or shorted
- Intake Air Temperature sensor circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0113 2013 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0113 2013 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0113 2013 Toyota RAV4 code?
Need more information on how to fix the P0113 2013 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0113 2013 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0113 2013 Toyota RAV4 Code
1. What does the OBDII code P0113 mean on a 2013 Toyota RAV4?
P0113 indicates "Intake Air Temperature Circuit High Input," meaning the sensor is reporting a temperature reading that is abnormally high, often due to an electrical issue.
2. What are the symptoms of a P0113 code in a 2013 Toyota RAV4?
Common symptoms include poor engine performance, reduced fuel efficiency, rough idling, and sometimes an illuminated Check Engine Light.
3. What causes the P0113 code in a 2013 Toyota RAV4?
Possible causes include a faulty intake air temperature (IAT) sensor, damaged or corroded wiring, a disconnected sensor, or a malfunctioning engine control module (ECM).
4. Can I still drive my 2013 Toyota RAV4 with a P0113 code?
While the vehicle may still be drivable, operating it with a P0113 code can lead to poor performance and potential engine damage over time. It's best to address the issue promptly.
5. How do I diagnose a P0113 code on a 2013 Toyota RAV4?
Start by inspecting the IAT sensor and its wiring for damage or disconnection. Use a multimeter to check for proper voltage and resistance. A diagnostic scan tool can also help confirm the issue.
6. How do I fix the P0113 code in my 2013 Toyota RAV4?
Repairs may include replacing the IAT sensor, repairing damaged wiring or connectors, or cleaning debris from the sensor area if contamination is present.
7. Where is the intake air temperature sensor located on a 2013 Toyota RAV4?
The IAT sensor is usually found on the intake manifold or integrated into the mass airflow (MAF) sensor near the air filter housing.
8. How much does it cost to fix a P0113 code on a 2013 Toyota RAV4?
Repair costs vary but typically range from $50 to $200 for parts and labor, depending on whether the IAT sensor or wiring needs replacement.
9. Can a dirty air filter trigger the P0113 code on a 2013 Toyota RAV4?
A dirty air filter is unlikely to cause P0113 directly, but it can contribute to poor airflow, which might exacerbate intake temperature sensor issues.
10. Will resetting the Check Engine Light fix the P0113 code on a 2013 Toyota RAV4?
Resetting the light will clear the code temporarily, but if the underlying issue isn’t resolved, the code will likely return.
Discuss the causes and fixes for P0113 2013 Toyota RAV4 OBDII Code
Code P0113 2013 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
