P0113 2012 NISSAN VERSA - Intake Air Temperature Sensor Circuit High
P0113 2012 NISSAN VERSA Possible Causes
- Faulty Intake Air Temperature (IAT) sensor
- Dirty air filter
- Intake Air Temperature (IAT) sensor harness is open or shorted
- Intake Air Temperature (IAT) sensor circuit poor electrical connection
How do I fix code P0113 2012 NISSAN VERSA?Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
Cost of diagnosing the P0113 2012 NISSAN VERSA code
Labor: 1.0The cost of diagnosing the P0113 2012 NISSAN VERSA code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
When is the code detected?- An excessively high voltage from the sensor is sent to ECM.
- Engine Light ON (or Service Engine Soon Warning Light)
P0113 2012 NISSAN VERSA DescriptionThe Intake Air Temperature (IAT) sensor is built into mass air flow sensor or in some vehicles mounted to the air filter duct housing. The sensor detects intake air temperature and transmits a signal to the Engine Control Module (ECM).The temperature sensing unit uses a thermistor which is sensitive to the change in temperature. Electrical resistance of the thermistor decreases in response to the temperature rise. The Intake Air Temperature signal is used as an input for various systems in the vehicle.
More InformationNeed more information on how to fix the P0113 2012 NISSAN VERSA code?
Get Access to Factory Service Manuals
Need more help?Get the P0113 2012 Nissan Versa code diagnosed by a professional: Find a repair shop in your area
CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P0113 2012 Nissan Versa code? Have you replaced any parts?
Any information is appreciated. Thanks