P0113 2012 Ford Fusion Code - Intake Air Temperature Sensor Circuit High Input
Quick Answer
The Intake Air Temperature (IAT) sensor is built into Mass Air Flow (MAF) sensor. Common causes include Dirty Air Filter, Faulty Intake Air Temperature (IAT) Sensor, Intake Air Temperature Sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0113 2012 Ford Fusion indicates Intake Air Temperature Sensor Circuit High Input.
- Common causes
- Common causes include Dirty Air Filter, Faulty Intake Air Temperature (IAT) Sensor, Intake Air Temperature Sensor harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0113 2012 Ford Fusion Description
What are the Possible Causes of the DTC P0113 2012 Ford Fusion?
- Dirty Air Filter
- Faulty Intake Air Temperature (IAT) Sensor
- Intake Air Temperature Sensor harness is open or shorted
- Intake Air Temperature Sensor circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC P0113 2012 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0113 2012 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0113 2012 Ford Fusion code?
Need more information on how to fix the P0113 2012 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0113 2012 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0113 2012 Ford Fusion Code
1. What are the common symptoms of OBDII code P0113 in a 2012 Ford Fusion?
- Common symptoms include poor engine performance, rough idling, and potential stalling.
2. What does the OBDII code P0113 on a 2012 Ford Fusion indicate?
- This code indicates a High Input condition in the Intake Air Temperature (IAT) sensor circuit.
3. What are the possible causes of OBDII code P0113 in a 2012 Ford Fusion?
- Possible causes include a faulty IAT sensor, damaged wiring or connectors in the sensor circuit, or a problem with the engine's computer.
4. How can I diagnose the cause of OBDII code P0113 in my 2012 Ford Fusion?
- You can start by checking the IAT sensor for proper operation, inspecting the sensor's wiring and connectors for damage, and using a scan tool to monitor sensor data.
5. Can a dirty air filter trigger OBDII code P0113 in a 2012 Ford Fusion?
- Yes, a dirty air filter can affect the IAT sensor readings and potentially trigger a High Input condition and set off the P0113 code.
6. Is it safe to drive my 2012 Ford Fusion with OBDII code P0113 active?
- It is generally not recommended to drive with this code active, as it can lead to poor engine performance and potential issues that may affect vehicle safety.
7. How can I repair OBDII code P0113 on my 2012 Ford Fusion?
- Repair options may include replacing the IAT sensor, repairing damaged wiring or connectors, and resetting the trouble code with a scan tool after the issue is resolved.
8. Can I reset the OBDII code P0113 in my 2012 Ford Fusion without fixing the underlying issue?
- While you can reset the code temporarily, it is crucial to address the underlying problem causing the High Input condition to prevent the code from reoccurring.
9. Will OBDII code P0113 affect my 2012 Ford Fusion's fuel efficiency?
- Yes, this code can impact fuel efficiency due to the engine not receiving accurate intake air temperature data, potentially leading to inefficient fuel combustion.
10. How much does it typically cost to fix OBDII code P0113 in a 2012 Ford Fusion?
- The cost of fixing this issue can vary depending on the exact cause, but it may range from $100 to $300 for parts and labor.
Discuss the causes and fixes for P0113 2012 Ford Fusion OBDII Code
Code P0113 2012 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
