P0113 2011 Nissan Rogue Code - Intake Air Temperature Sensor Circuit High
Quick Answer
The Intake Air Temperature (IAT) sensor is built into mass air flow sensor or in some vehicles mounted to the air filter duct housing. Common causes include Faulty Intake Air Temperature (IAT) sensor, Dirty air filter, Intake Air Temperature (IAT) sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0113 2011 Nissan Rogue indicates Intake Air Temperature Sensor Circuit High.
- Common causes
- Common causes include Faulty Intake Air Temperature (IAT) sensor, Dirty air filter, Intake Air Temperature (IAT) sensor harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0113 2011 Nissan Rogue Description
What are the Possible Causes of the DTC P0113 2011 Nissan Rogue?
- Faulty Intake Air Temperature (IAT) sensor
- Dirty air filter
- Intake Air Temperature (IAT) sensor harness is open or shorted
- Intake Air Temperature (IAT) sensor circuit poor electrical connection
How to Fix the DTC P0113 2011 Nissan Rogue?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0113 2011 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0113 2011 Nissan Rogue code?
Need more information on how to fix the P0113 2011 Nissan Rogue code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0113 2011 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0113 2011 Nissan Rogue Code
1. What are the common symptoms of OBDII code P0113 in a 2011 Nissan Rogue?
The common symptoms of OBDII code P0113 (Intake Air Temperature Sensor Circuit High) in a 2011 Nissan Rogue include rough idling, engine stalling, poor fuel efficiency, and a check engine light illuminated on the dashboard.
2. What causes the OBDII code P0113 in a 2011 Nissan Rogue?
The primary cause of OBDII code P0113 in a 2011 Nissan Rogue is a faulty intake air temperature (IAT) sensor, which measures the temperature of the incoming air to the engine.
3. How can I diagnose the OBDII code P0113 in my 2011 Nissan Rogue?
To diagnose OBDII code P0113 in a 2011 Nissan Rogue, you can use an OBDII scanner to read the fault code and check the intake air temperature sensor for any signs of damage or malfunction.
4. Can a dirty air filter trigger OBDII code P0113 in a 2011 Nissan Rogue?
Yes, a dirty air filter can indirectly trigger OBDII code P0113 in a 2011 Nissan Rogue by affecting the accuracy of the intake air temperature sensor readings.
5. What are some repair tips for fixing OBDII code P0113 in a 2011 Nissan Rogue?
Some repair tips for fixing OBDII code P0113 in a 2011 Nissan Rogue include inspecting and cleaning the intake air temperature sensor, checking the sensor's wiring for any damage, and replacing the sensor if necessary.
6. Is it safe to continue driving my 2011 Nissan Rogue with OBDII code P0113?
It is not recommended to continue driving your 2011 Nissan Rogue with OBDII code P0113, as it can lead to poor engine performance, decreased fuel efficiency, and potential damage to other engine components.
7. Can a DIY enthusiast fix OBDII code P0113 in a 2011 Nissan Rogue?
A DIY enthusiast with some mechanical knowledge and the right tools can attempt to fix OBDII code P0113 in a 2011 Nissan Rogue by following repair manuals or online guides specific to the vehicle.
8. How much does it cost to repair OBDII code P0113 in a 2011 Nissan Rogue at a mechanic?
The cost to repair OBDII code P0113 in a 2011 Nissan Rogue at a mechanic can vary depending on the exact cause of the issue, but it typically ranges from $100 to $300 for parts and labor.
9. Will resetting the check engine light resolve OBDII code P0113 in a 2011 Nissan Rogue?
Resetting the check engine light may temporarily turn it off, but it will not resolve OBDII code P0113 in a 2011 Nissan Rogue unless the underlying issue with the intake air temperature sensor is fixed.
10. How often does OBDII code P0113 occur in a 2011 Nissan Rogue?
OBDII code P0113 (Intake Air Temperature Sensor Circuit High) may occur sporadically in a 2011 Nissan Rogue due to sensor malfunctions, external factors, or poor maintenance practices.
Discuss the causes and fixes for P0113 2011 Nissan Rogue OBDII Code
Code P0113 2011 Nissan Rogue comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
