P0113 2010 Nissan Rogue Code - Intake Air Temperature Sensor Circuit High
Quick Answer
The Intake Air Temperature (IAT) sensor is built into mass air flow sensor or in some vehicles mounted to the air filter duct housing. Common causes include Faulty Intake Air Temperature (IAT) sensor, Dirty air filter, Intake Air Temperature (IAT) sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0113 2010 Nissan Rogue indicates Intake Air Temperature Sensor Circuit High.
- Common causes
- Common causes include Faulty Intake Air Temperature (IAT) sensor, Dirty air filter, Intake Air Temperature (IAT) sensor harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0113 2010 Nissan Rogue Description
What are the Possible Causes of the DTC P0113 2010 Nissan Rogue?
- Faulty Intake Air Temperature (IAT) sensor
- Dirty air filter
- Intake Air Temperature (IAT) sensor harness is open or shorted
- Intake Air Temperature (IAT) sensor circuit poor electrical connection
How to Fix the DTC P0113 2010 Nissan Rogue?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0113 2010 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0113 2010 Nissan Rogue code?
Need more information on how to fix the P0113 2010 Nissan Rogue code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0113 2010 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0113 2010 Nissan Rogue Code
1. What does OBDII code P0113 on a 2010 Nissan Rogue mean?
The code P0113 indicates an issue with the Intake Air Temperature (IAT) sensor circuit, specifically that the sensor is reading a high voltage.
2. What are the common symptoms of a P0113 error code in a 2010 Nissan Rogue?
Common symptoms include poor engine performance, rough idling, decreased fuel efficiency, and in some cases, the Check Engine light may illuminate.
3. What are the possible causes of a P0113 code in a 2010 Nissan Rogue?
Potential causes include a faulty IAT sensor, damaged wiring or connectors in the sensor circuit, a dirty air filter, or issues with the engine's air intake system.
4. How can I diagnose a P0113 error code in my 2010 Nissan Rogue?
Diagnosing a P0113 code typically involves checking the IAT sensor and its wiring for damage, cleaning or replacing the air filter, and inspecting the air intake system for any obstructions.
5. Can I drive my 2010 Nissan Rogue with a P0113 error code?
It is not recommended to drive your vehicle with a P0113 code as it can lead to poor engine performance and potentially cause further damage to the engine.
6. How can I repair a P0113 error code in my 2010 Nissan Rogue?
To repair a P0113 code, you may need to replace the IAT sensor, repair any damaged wiring or connectors, clean or replace the air filter, and ensure the air intake system is functioning properly.
7. Can a DIY enthusiast fix a P0113 error code in a 2010 Nissan Rogue?
Depending on your mechanical skills and knowledge, you may be able to address a P0113 code yourself by following a repair manual or seeking guidance from online resources.
8. Will resetting the Check Engine light resolve a P0113 error code in a 2010 Nissan Rogue?
Simply resetting the Check Engine light will not fix the underlying issue causing the P0113 code. It is important to diagnose and repair the root cause of the problem.
9. How much does it cost to fix a P0113 error code in a 2010 Nissan Rogue?
The cost of repairing a P0113 code can vary depending on the specific issue causing the code, the labor rates in your area, and whether you choose to address the problem yourself or have a professional mechanic do the work.
10. How often does a P0113 error code occur in a 2010 Nissan Rogue?
A P0113 code can occur sporadically or more frequently depending on the severity of the underlying issue. It is essential to address the problem promptly to prevent further complications.
Discuss the causes and fixes for P0113 2010 Nissan Rogue OBDII Code
Code P0113 2010 Nissan Rogue comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
