P0113 2010 Nissan Altima Sedan Code - Intake Air Temperature Sensor Circuit High
Quick Answer
The Intake Air Temperature (IAT) sensor is built into mass air flow sensor or in some vehicles mounted to the air filter duct housing. Common causes include Faulty Intake Air Temperature (IAT) sensor, Dirty air filter, Intake Air Temperature (IAT) sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0113 2010 Nissan Altima Sedan indicates Intake Air Temperature Sensor Circuit High.
- Common causes
- Common causes include Faulty Intake Air Temperature (IAT) sensor, Dirty air filter, Intake Air Temperature (IAT) sensor harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0113 2010 Nissan Altima Sedan Description
What are the Possible Causes of the DTC P0113 2010 Nissan Altima Sedan?
- Faulty Intake Air Temperature (IAT) sensor
- Dirty air filter
- Intake Air Temperature (IAT) sensor harness is open or shorted
- Intake Air Temperature (IAT) sensor circuit poor electrical connection
How to Fix the DTC P0113 2010 Nissan Altima Sedan?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0113 2010 Nissan Altima Sedan code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0113 2010 Nissan Altima Sedan code?
Need more information on how to fix the P0113 2010 Nissan Altima Sedan code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0113 2010 Nissan Altima Sedan code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0113 2010 Nissan Altima Sedan Code
1. What are the common symptoms of OBDII code P0113 in a 2010 Nissan Altima Sedan?
- Common symptoms include issues with fuel economy, engine performance, and potential stalling or rough idling.
2. What does the OBDII code P0113 "Intake Air Temperature Sensor Circuit High" mean for a 2010 Nissan Altima Sedan?
- This code indicates that the Engine Control Module (ECM) has detected a high voltage signal from the intake air temperature sensor.
3. What are the possible causes of OBDII code P0113 in a 2010 Nissan Altima Sedan?
- Possible causes include a faulty intake air temperature sensor, damaged wiring or connectors, or issues with the ECM.
4. How can I diagnose the cause of OBDII code P0113 in my 2010 Nissan Altima Sedan?
- You can use a multimeter to test the intake air temperature sensor for proper resistance values and check the wiring and connectors for any damage or corrosion.
5. What are the repair options for fixing OBDII code P0113 in a 2010 Nissan Altima Sedan?
- Repair options may include replacing the intake air temperature sensor, repairing damaged wiring or connectors, or reprogramming the ECM if necessary.
6. Can I drive my 2010 Nissan Altima Sedan with OBDII code P0113?
- It is not recommended to drive the vehicle with this code present, as it can lead to poor engine performance and potential further damage if left unresolved.
7. How much does it typically cost to repair OBDII code P0113 in a 2010 Nissan Altima Sedan?
- The cost of repair can vary depending on the exact cause of the issue, but it may range from around $100 to $300 for parts and labor.
8. Are there any DIY tips for troubleshooting OBDII code P0113 in a 2010 Nissan Altima Sedan?
- DIY tips include checking and cleaning the intake air temperature sensor, inspecting wiring for visible damage, and ensuring all connections are secure.
9. How urgent is it to address OBDII code P0113 in a 2010 Nissan Altima Sedan?
- While the vehicle may still be operable with this code, it is best to address it promptly to prevent potential engine performance issues and further damage.
10. Will resetting the OBDII code P0113 in a 2010 Nissan Altima Sedan make it go away permanently?
- Simply resetting the code may temporarily remove the warning light, but if the underlying issue is not fixed, the code is likely to reappear.
Discuss the causes and fixes for P0113 2010 Nissan Altima Sedan OBDII Code
Code P0113 2010 Nissan Altima Sedan comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
