AutoCodes – Honda – P0113 2010 Honda Accord

P0113 2010 Honda Accord Code - Intake Air Temperature Sensor Circuit High Voltage

Quick Answer

The Intake Air Temperature (IAT) sensor is built into mass air flow sensor or in some vehicles mounted to the air filter duct housing. Common causes include Faulty Intake Air Temperature (IAT) sensor, Dirty air filter, Intake Air Temperature (IAT) sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0113 2010 Honda Accord indicates Intake Air Temperature Sensor Circuit High Voltage.
Common causes: Common causes include Faulty Intake Air Temperature (IAT) sensor, Dirty air filter, Intake Air Temperature (IAT) sensor harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 11,882

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0113 2010 Honda Accord Description

The Intake Air Temperature (IAT) sensor is built into mass air flow sensor or in some vehicles mounted to the air filter duct housing. The sensor detects intake air temperature and transmits a signal to the Engine Control Module (ECM).The temperature sensing unit uses a thermistor which is sensitive to the change in temperature. Electrical resistance of the thermistor decreases in response to the temperature rise. The Intake Air Temperature signal is used as an input for various systems in the vehicle.

OBDII Code P0113 2010 Honda Accord - Intake Air Temperature Sensor Circuit High Voltage - AutoCodes.com — P0113 2010 Honda Accord Code - Intake Air Temperature Sensor Circuit High Voltage

What does this mean?

What are the Possible Causes of the DTC P0113 2010 Honda Accord?

Faulty Intake Air Temperature (IAT) sensor
Dirty air filter
Intake Air Temperature (IAT) sensor harness is open or shorted
Intake Air Temperature (IAT) sensor circuit poor electrical connection

How to Fix the DTC P0113 2010 Honda Accord?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0113 2010 Honda Accord code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0113 2010 Honda Accord code?

Need more information on how to fix the P0113 2010 Honda Accord code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0113 2010 Honda Accord code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0113 2010 Honda Accord Code

1. What does the OBDII code P0113 on a 2010 Honda Accord mean?

The code P0113 indicates a problem with the Intake Air Temperature (IAT) sensor circuit, specifically a high voltage condition.

2. What are common symptoms of a P0113 code on a 2010 Honda Accord?

Common symptoms include poor engine performance, rough idle, stalling, decreased fuel efficiency, and the Check Engine light illuminating on the dashboard.

3. What causes the P0113 code to trigger on a 2010 Honda Accord?

The P0113 code is often triggered by a faulty or damaged Intake Air Temperature (IAT) sensor, loose or corroded electrical connections, or issues with the sensor circuit wiring.

4. How can I diagnose the cause of a P0113 code on my 2010 Honda Accord?

You can diagnose the P0113 code by visually inspecting the IAT sensor and its wiring for damage, testing the sensor's resistance with a multimeter, and checking for voltage at the sensor connector.

5. What are some possible repair options for a P0113 code on a 2010 Honda Accord?

Repair options include replacing the Intake Air Temperature (IAT) sensor, repairing or replacing damaged wiring or connectors, and clearing the trouble code with an OBDII scanner.

6. Can a P0113 code on a 2010 Honda Accord cause any long-term damage if left unaddressed?

While driving with a P0113 code may not cause immediate damage, it can lead to poor engine performance, reduced fuel efficiency, and potential long-term issues if not resolved promptly.

7. Is it safe to drive my 2010 Honda Accord with a P0113 code present?

It is generally not recommended to drive with a P0113 code present, as it can affect your vehicle's performance and fuel efficiency. It's best to address the issue as soon as possible.

8. How much does it typically cost to repair a P0113 code on a 2010 Honda Accord?

The cost of repairing a P0113 code can vary depending on the root cause of the issue. Replacing the Intake Air Temperature (IAT) sensor or repairing wiring may cost anywhere from $50 to $200, including parts and labor.

9. Can I reset the P0113 code on my 2010 Honda Accord without fixing the underlying issue?

While you can clear the trouble code with an OBDII scanner, it is essential to address the underlying problem causing the P0113 code to prevent it from reoccurring and potentially causing further issues.

10. How can I prevent the P0113 code from reappearing on my 2010 Honda Accord in the future?

Regularly inspecting and maintaining the Intake Air Temperature (IAT) sensor, ensuring proper electrical connections, and addressing any issues promptly can help prevent the recurrence of the P0113 code on your Honda Accord.