P0113 2009 Nissan Rogue Code - Intake Air Temperature Sensor Circuit High
Quick Answer
The Intake Air Temperature (IAT) sensor is built into mass air flow sensor or in some vehicles mounted to the air filter duct housing. Common causes include Faulty Intake Air Temperature (IAT) sensor, Dirty air filter, Intake Air Temperature (IAT) sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0113 2009 Nissan Rogue indicates Intake Air Temperature Sensor Circuit High.
- Common causes
- Common causes include Faulty Intake Air Temperature (IAT) sensor, Dirty air filter, Intake Air Temperature (IAT) sensor harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0113 2009 Nissan Rogue Description
What are the Possible Causes of the DTC P0113 2009 Nissan Rogue?
- Faulty Intake Air Temperature (IAT) sensor
- Dirty air filter
- Intake Air Temperature (IAT) sensor harness is open or shorted
- Intake Air Temperature (IAT) sensor circuit poor electrical connection
How to Fix the DTC P0113 2009 Nissan Rogue?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0113 2009 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0113 2009 Nissan Rogue code?
Need more information on how to fix the P0113 2009 Nissan Rogue code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0113 2009 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0113 2009 Nissan Rogue Code
1. What are the common symptoms of OBDII code P0113 on a 2009 Nissan Rogue?
The common symptoms of code P0113 include poor engine performance, decreased fuel efficiency, and the illumination of the check engine light.
2. What does the OBDII code P0113 indicate on a 2009 Nissan Rogue?
Code P0113 indicates a potential issue with the Intake Air Temperature (IAT) sensor circuit, specifically that the sensor is reading a high voltage signal.
3. What are the possible causes of OBDII code P0113 on a 2009 Nissan Rogue?
Possible causes of code P0113 on a 2009 Nissan Rogue include a faulty IAT sensor, damaged sensor wiring, a disconnected sensor, or issues with the sensor's connector.
4. How can I diagnose the Intake Air Temperature sensor circuit high issue on a 2009 Nissan Rogue?
You can diagnose the issue by checking the IAT sensor's wiring and connector for damage, ensuring the sensor is properly connected, and using a multimeter to test the sensor's resistance.
5. Can I drive my 2009 Nissan Rogue with OBDII code P0113?
It is not recommended to drive your vehicle with code P0113 as it can lead to further engine damage and decreased performance. It is best to address the issue promptly.
6. How can I repair OBDII code P0113 on my 2009 Nissan Rogue?
To repair code P0113, you may need to replace the Intake Air Temperature sensor, repair any damaged wiring or connectors, and clear the code using an OBDII scanner.
7. Will resetting the OBDII code P0113 on a 2009 Nissan Rogue fix the issue?
Simply resetting the code may temporarily turn off the check engine light, but it will not fix the underlying issue causing code P0113. Proper diagnosis and repair are necessary.
8. How much does it cost to fix OBDII code P0113 on a 2009 Nissan Rogue?
The cost of fixing code P0113 can vary depending on the exact cause of the issue. Replacing the IAT sensor or repairing wiring may cost between $100 to $300 at a repair shop.
9. Can a dirty air filter cause OBDII code P0113 on a 2009 Nissan Rogue?
While a dirty air filter can affect engine performance, it is unlikely to directly cause code P0113. Focus on checking the IAT sensor and its circuit for issues.
10. Is OBDII code P0113 a serious problem on a 2009 Nissan Rogue?
Code P0113 should be addressed promptly to prevent further engine issues and maintain optimal vehicle performance. Ignoring the code can lead to decreased fuel efficiency and potential engine damage.
Discuss the causes and fixes for P0113 2009 Nissan Rogue OBDII Code
Code P0113 2009 Nissan Rogue comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
