P0113 2009 Ford Fusion Code - Intake Air Temperature Sensor Circuit High Input
Quick Answer
The Intake Air Temperature (IAT) sensor is built into Mass Air Flow (MAF) sensor. Common causes include Dirty Air Filter, Faulty Intake Air Temperature (IAT) Sensor, Intake Air Temperature Sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0113 2009 Ford Fusion indicates Intake Air Temperature Sensor Circuit High Input.
- Common causes
- Common causes include Dirty Air Filter, Faulty Intake Air Temperature (IAT) Sensor, Intake Air Temperature Sensor harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0113 2009 Ford Fusion Description
What are the Possible Causes of the DTC P0113 2009 Ford Fusion?
- Dirty Air Filter
- Faulty Intake Air Temperature (IAT) Sensor
- Intake Air Temperature Sensor harness is open or shorted
- Intake Air Temperature Sensor circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC P0113 2009 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0113 2009 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0113 2009 Ford Fusion code?
Need more information on how to fix the P0113 2009 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0113 2009 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0113 2009 Ford Fusion Code
1. What are the common symptoms of OBDII code P0113 on a 2009 Ford Fusion?
The common symptoms of P0113 include poor fuel economy, rough idling, engine stalling, and a decrease in overall performance.
2. What does the OBDII code P0113 indicate in a 2009 Ford Fusion?
P0113 indicates a high input signal from the intake air temperature sensor circuit in a 2009 Ford Fusion.
3. What are the possible causes of OBDII code P0113 on a 2009 Ford Fusion?
Possible causes of P0113 include a faulty intake air temperature sensor, damaged wiring or connectors, a dirty air filter, or a problem with the engine's cooling system.
4. How can I diagnose the issue causing OBDII code P0113 on my 2009 Ford Fusion?
You can diagnose the issue by checking the intake air temperature sensor for proper operation, inspecting the wiring and connectors for damage, and ensuring the air filter is clean and the cooling system is functioning correctly.
5. Can a high intake air temperature sensor reading affect the performance of my 2009 Ford Fusion?
Yes, a high intake air temperature sensor reading can lead to incorrect fuel delivery, timing adjustments, and other performance issues in your 2009 Ford Fusion.
6. Is it safe to continue driving my 2009 Ford Fusion with OBDII code P0113?
It is not recommended to continue driving your vehicle with code P0113, as it can lead to decreased fuel efficiency and potential engine damage if left unresolved.
7. How can I repair OBDII code P0113 on my 2009 Ford Fusion?
Repairing code P0113 may involve replacing the intake air temperature sensor, repairing damaged wiring, cleaning the air filter, or addressing any cooling system issues as needed.
8. Can I reset the OBDII code P0113 on my 2009 Ford Fusion by disconnecting the battery?
While disconnecting the battery may clear the code temporarily, it is essential to diagnose and address the root cause of P0113 to prevent it from reoccurring in your 2009 Ford Fusion.
9. Will fixing OBDII code P0113 improve the fuel efficiency of my 2009 Ford Fusion?
Yes, resolving code P0113 and ensuring the intake air temperature sensor is functioning correctly can lead to improved fuel efficiency in your 2009 Ford Fusion.
10. How much does it typically cost to repair OBDII code P0113 on a 2009 Ford Fusion?
The cost of repairing code P0113 can vary depending on the specific cause of the issue, but it may range from $100 to $300 for parts and labor.
Discuss the causes and fixes for P0113 2009 Ford Fusion OBDII Code
Code P0113 2009 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
