AutoCodes - Toyota - P0113 2008 TOYOTA PRIUS

P0113 2008 TOYOTA PRIUS Code - Intake Air Temperature Circuit High Input

Repair Importance Level: 3/3
Repair Difficulty Level: 2/3
Table of contents

|P0113 2008 TOYOTA PRIUS code possible causes

  • Faulty Intake Air Temperature (IAT) sensor
  • Dirty air filter
  • Intake Air Temperature (IAT) sensor harness is open or shorted
  • Intake Air Temperature (IAT) sensor circuit poor electrical connection

|How do I fix the P0113 2008 TOYOTA PRIUS code?

Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

|P0113 2008 TOYOTA PRIUS code tech notes

Intake air temperature sensor is built into the mass air flow meter. Before doing anything else clean the mass air flow meter with mass air flow sensor cleaner and reset the light.

|Cost of diagnosing the P0113 2008 TOYOTA PRIUS code

Labor: 1.0

The cost of diagnosing the P0113 2008 TOYOTA PRIUS code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.

|When is the P0113 2008 TOYOTA PRIUS code detected?

- An excessively high voltage from the sensor is sent to ECM.

|What are P0113 2008 TOYOTA PRIUS code possible symptoms?

  • Engine Light ON (or Service Engine Soon Warning Light)

|P0113 2008 TOYOTA PRIUS code description

The Intake Air Temperature (IAT) sensor is built into mass air flow sensor or in some vehicles mounted to the air filter duct housing. The sensor detects intake air temperature and transmits a signal to the Engine Control Module (ECM).The temperature sensing unit uses a thermistor which is sensitive to the change in temperature. Electrical resistance of the thermistor decreases in response to the temperature rise. The Intake Air Temperature signal is used as an input for various systems in the vehicle.
OBDII Code P0113 2008 Toyota Prius - Intake Air Temperature Circuit High Input - AutoCodes.com

|Need more information with the P0113 2008 TOYOTA PRIUS code?

Need more information on how to fix the P0113 2008 TOYOTA PRIUS code?
Get Access to Factory Service Manuals

|Need help with a P0113 2008 TOYOTA PRIUS code?

Get the P0113 2008 Toyota Prius code diagnosed by a professional: Find a repair shop in your area

|P0113 2008 TOYOTA PRIUS code comments

Help us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the P0113 2008 Toyota Prius code? Have you replaced any parts?
Any information is appreciated. Thanks
Top ⇧
Repair Importance Level: 3
 
1=Low 2=Medium 3=High What is this?
Repair Difficulty Level: 2
 
1=Easy 2=Moderate 3=Hard What is this?