P0113 2008 Nissan Rogue Code - Intake Air Temperature Sensor Circuit High
Quick Answer
The Intake Air Temperature (IAT) sensor is built into mass air flow sensor or in some vehicles mounted to the air filter duct housing. Common causes include Faulty Intake Air Temperature (IAT) sensor, Dirty air filter, Intake Air Temperature (IAT) sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0113 2008 Nissan Rogue indicates Intake Air Temperature Sensor Circuit High.
- Common causes
- Common causes include Faulty Intake Air Temperature (IAT) sensor, Dirty air filter, Intake Air Temperature (IAT) sensor harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0113 2008 Nissan Rogue Description
What are the Possible Causes of the DTC P0113 2008 Nissan Rogue?
- Faulty Intake Air Temperature (IAT) sensor
- Dirty air filter
- Intake Air Temperature (IAT) sensor harness is open or shorted
- Intake Air Temperature (IAT) sensor circuit poor electrical connection
How to Fix the DTC P0113 2008 Nissan Rogue?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0113 2008 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0113 2008 Nissan Rogue code?
Need more information on how to fix the P0113 2008 Nissan Rogue code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0113 2008 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0113 2008 Nissan Rogue Code
1. What are the common symptoms of OBDII code P0113 on a 2008 Nissan Rogue?
When the Intake Air Temperature Sensor Circuit High error code P0113 is triggered, you may experience issues such as engine stalling, rough idling, and a decrease in fuel efficiency.
2. What causes the OBDII code P0113 on a 2008 Nissan Rogue?
The most common cause of the Intake Air Temperature Sensor Circuit High code P0113 on a 2008 Nissan Rogue is a faulty intake air temperature sensor or a wiring issue in the sensor circuit.
3. How can I diagnose the OBDII code P0113 on my 2008 Nissan Rogue?
To diagnose the Intake Air Temperature Sensor Circuit High code P0113, you can use a scan tool to read the code, visually inspect the sensor and its wiring for any damage, and test the sensor's resistance using a multimeter.
4. Can I still drive my 2008 Nissan Rogue with the P0113 code?
It is not recommended to drive your 2008 Nissan Rogue with the Intake Air Temperature Sensor Circuit High code P0113, as it can cause further damage to the engine and negatively impact performance.
5. How do I repair the OBDII code P0113 on a 2008 Nissan Rogue?
To repair the Intake Air Temperature Sensor Circuit High code P0113, you may need to replace the intake air temperature sensor, repair any damaged wiring in the circuit, and clear the trouble code using a scan tool.
6. Are there any DIY tips for fixing the P0113 code on a 2008 Nissan Rogue?
If you have experience with automotive repairs, you may be able to replace the intake air temperature sensor yourself by following a repair manual specific to your 2008 Nissan Rogue model.
7. Will resetting the OBDII code P0113 on my 2008 Nissan Rogue make it go away permanently?
Simply resetting the Intake Air Temperature Sensor Circuit High code P0113 on your 2008 Nissan Rogue will not fix the underlying issue causing the fault. It is important to diagnose and repair the root cause of the problem.
8. How much does it cost to repair the P0113 code on a 2008 Nissan Rogue at a mechanic?
The cost of repairing the Intake Air Temperature Sensor Circuit High code P0113 on a 2008 Nissan Rogue at a mechanic can vary depending on the labor rates and parts needed, but it typically ranges from $100 to $300.
9. Can a bad intake air temperature sensor cause other issues besides the P0113 code on a 2008 Nissan Rogue?
Yes, a faulty intake air temperature sensor can cause other issues on a 2008 Nissan Rogue, such as poor engine performance, increased emissions, and incorrect air-fuel mixture, leading to potential engine damage.
10. How long does it take to repair the P0113 code on a 2008 Nissan Rogue?
The repair time for the Intake Air Temperature Sensor Circuit High code P0113 on a 2008 Nissan Rogue can vary depending on the extent of the issue and the availability of parts, but it typically takes a few hours to complete the repair.
Discuss the causes and fixes for P0113 2008 Nissan Rogue OBDII Code
Code P0113 2008 Nissan Rogue comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
