P0113 2006 Nissan Altima Sedan Code - Intake Air Temperature Sensor Circuit High
Quick Answer
The Intake Air Temperature (IAT) sensor is variable temperature sensitive resistor that measures the temperature of the air in the intake system. Common causes include Faulty Intake Air Temperature (IAT) sensor, Dirty air filter, Intake Air Temperature (IAT) sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0113 2006 Nissan Altima Sedan indicates Intake Air Temperature Sensor Circuit High.
- Common causes
- Common causes include Faulty Intake Air Temperature (IAT) sensor, Dirty air filter, Intake Air Temperature (IAT) sensor harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0113 2006 Nissan Altima Sedan Description
IAT sensor values are used by the ECM processor to assist with the calculation of idle speed, fuel mixture and spark advance.
Inaccurate voltages from the IAT sensor may affect pulse-width, idle quality, and tail pipe emissions. Intermittent signals may cause hesitation, stumble and surging. If an IAT sensor failure accompanies an Engine Coolant Temperature (ECT) sensor failure, cooling fan operation may also be affected.
The Intake Air Temperature (IAT) sensor is part of the Mass Air Flow (MAF) sensor (Air Flow Meter).
What are the Possible Causes of the DTC P0113 2006 Nissan Altima Sedan?
- Faulty Intake Air Temperature (IAT) sensor
- Dirty air filter
- Intake Air Temperature (IAT) sensor harness is open or shorted
- Intake Air Temperature (IAT) sensor circuit poor electrical connection
How to Fix the DTC P0113 2006 Nissan Altima Sedan?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0113 2006 Nissan Altima Sedan code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0113 2006 Nissan Altima Sedan code?
Need more information on how to fix the P0113 2006 Nissan Altima Sedan code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0113 2006 Nissan Altima Sedan code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0113 2006 Nissan Altima Sedan Code
1. What are the common symptoms of OBDII code P0113 in a 2006 Nissan Altima Sedan?
The common symptoms include poor fuel economy, rough idling, engine stalling, and a decrease in overall engine performance.
2. What does the OBDII code P0113 on a 2006 Nissan Altima Sedan indicate?
The code P0113 indicates an issue with the Intake Air Temperature (IAT) sensor circuit, specifically that the sensor is reporting a high voltage input.
3. What are the possible causes of the P0113 code in a 2006 Nissan Altima Sedan?
Possible causes include a faulty IAT sensor, a damaged sensor connector or wiring, a disconnected sensor, or issues with the engine's intake air system.
4. How can I diagnose the P0113 code in my 2006 Nissan Altima Sedan?
You can diagnose the code by checking the IAT sensor for proper connection and damage, inspecting the sensor wiring, and using a multimeter to test the sensor's resistance and voltage output.
5. Can I drive my 2006 Nissan Altima Sedan with the P0113 code?
It is not recommended to drive with the P0113 code as it can lead to poor engine performance and potential damage over time. It's best to address the issue promptly.
6. How can I repair the P0113 code in my 2006 Nissan Altima Sedan?
Repair options include replacing the faulty IAT sensor, repairing or replacing damaged wiring, ensuring proper sensor connection, and clearing the trouble code with an OBDII scanner.
7. Can a dirty air filter trigger the P0113 code in a 2006 Nissan Altima Sedan?
While a dirty air filter can impact engine performance, it is not a direct cause of the P0113 code. Focus on checking the IAT sensor and its related components for issues.
8. Will resetting the OBDII code P0113 in my 2006 Nissan Altima Sedan make it go away permanently?
Resetting the code will clear it temporarily, but if the underlying issue causing the P0113 code is not addressed, it is likely to reappear after driving for some time.
9. Is it necessary to replace the IAT sensor when dealing with the P0113 code in a 2006 Nissan Altima Sedan?
If diagnostics confirm that the IAT sensor is faulty and causing the high voltage reading, replacing the sensor is usually the most effective solution to resolve the P0113 code.
10. Can a dealership or mechanic help diagnose and repair the P0113 code in a 2006 Nissan Altima Sedan?
Yes, a dealership or mechanic with experience in diagnosing and repairing OBDII codes can assist in properly diagnosing and resolving the P0113 code in your Nissan Altima Sedan.
Discuss the causes and fixes for P0113 2006 Nissan Altima Sedan OBDII Code
Code P0113 2006 Nissan Altima Sedan comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
