AutoCodes - Nissan - P0113 2002 NISSAN ALTIMA SEDAN

P0113 2002 NISSAN ALTIMA SEDAN Code - Intake Air Temperature Sensor Circuit High

Repair Importance Level: 3/3
Repair Difficulty Level: 2/3
Table of contents

|P0113 2002 NISSAN ALTIMA SEDAN code possible causes

  • Faulty Intake Air Temperature (IAT) sensor
  • Dirty air filter
  • Intake Air Temperature (IAT) sensor harness is open or shorted
  • Intake Air Temperature (IAT) sensor circuit poor electrical connection

|How do I fix the P0113 2002 NISSAN ALTIMA SEDAN code?

Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

|P0113 2002 NISSAN ALTIMA SEDAN code tech notes

Since the Intake Air Temperature (IAT) Sensor is par of the Mass Air Flow (MAF) Sensor, start by cleaning the MAF. If the problem persists the MAF may need to be replaced.

|Cost of diagnosing the P0113 2002 NISSAN ALTIMA SEDAN code

Labor: 1.0

The cost of diagnosing the P0113 2002 NISSAN ALTIMA SEDAN code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.

|When is the P0113 2002 NISSAN ALTIMA SEDAN code detected?

- An excessively high voltage from the sensor is sent to ECM.

|What are P0113 2002 NISSAN ALTIMA SEDAN code possible symptoms?

  • Engine Light ON (or Service Engine Soon Warning Light)

|P0113 2002 NISSAN ALTIMA SEDAN code description

The Intake Air Temperature (IAT) sensor is variable temperature sensitive resistor that measures the temperature of the air in the intake system. Sensor resistance will change based on air temperature. The higher the temperature is, the lower the resistance. The Engine Control Module (ECM) provides a reference voltage and monitors the voltage drop between a fixed value internal resistance and the sensor resistance. This is called a voltage divider circuit.
IAT sensor values are used by the ECM processor to assist with the calculation of idle speed, fuel mixture and spark advance.
Inaccurate voltages from the IAT sensor may affect pulse-width, idle quality, and tail pipe emissions. Intermittent signals may cause hesitation, stumble and surging. If an IAT sensor failure accompanies an Engine Coolant Temperature (ECT) sensor failure, cooling fan operation may also be affected.
The Intake Air Temperature (IAT) sensor is part of the Mass Air Flow (MAF) sensor (Air Flow Meter).
OBDII Code P0113 2002 Nissan Altima Sedan - Intake Air Temperature Sensor Circuit High - AutoCodes.com

|Need more information with the P0113 2002 NISSAN ALTIMA SEDAN code?

Need more information on how to fix the P0113 2002 NISSAN ALTIMA SEDAN code?
Get Access to Factory Service Manuals

|Need help with a P0113 2002 NISSAN ALTIMA SEDAN code?

Get the P0113 2002 Nissan Altima Sedan code diagnosed by a professional: Find a repair shop in your area

|P0113 2002 NISSAN ALTIMA SEDAN code comments

Help us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the P0113 2002 Nissan Altima Sedan code? Have you replaced any parts?
Any information is appreciated. Thanks
Top ⇧
Repair Importance Level: 3
 
1=Low 2=Medium 3=High What is this?
Repair Difficulty Level: 2
 
1=Easy 2=Moderate 3=Hard What is this?