P0113 1996 Honda Civic Code - Intake Air Temperature Sensor Circuit High Voltage
Quick Answer
The Intake Air Temperature (IAT) sensor is built into mass air flow sensor or in some vehicles mounted to the air filter duct housing. Common causes include Faulty Intake Air Temperature (IAT) sensor, Dirty air filter, Intake Air Temperature (IAT) sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0113 1996 Honda Civic indicates Intake Air Temperature Sensor Circuit High Voltage.
- Common causes
- Common causes include Faulty Intake Air Temperature (IAT) sensor, Dirty air filter, Intake Air Temperature (IAT) sensor harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0113 1996 Honda Civic Description
What are the Possible Causes of the DTC P0113 1996 Honda Civic?
- Faulty Intake Air Temperature (IAT) sensor
- Dirty air filter
- Intake Air Temperature (IAT) sensor harness is open or shorted
- Intake Air Temperature (IAT) sensor circuit poor electrical connection
How to Fix the DTC P0113 1996 Honda Civic?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0113 1996 Honda Civic code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0113 1996 Honda Civic code?
Need more information on how to fix the P0113 1996 Honda Civic code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0113 1996 Honda Civic code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0113 1996 Honda Civic Code
1. What are the common symptoms of OBDII code P0113 in a 1996 Honda Civic?
- Common symptoms include poor engine performance, decreased fuel efficiency, rough idling, and potential stalling.
2. What does the OBDII code P0113 on a 1996 Honda Civic indicate?
- The code P0113 indicates a high voltage condition in the Intake Air Temperature (IAT) sensor circuit.
3. What are the possible causes of the P0113 code in a 1996 Honda Civic?
- Possible causes include a faulty IAT sensor, damaged wiring or connectors in the sensor circuit, or a problem with the engine control module (ECM).
4. How can I diagnose the P0113 code in a 1996 Honda Civic?
- To diagnose the issue, you can use a multimeter to test the IAT sensor, check the wiring for any breaks or shorts, and inspect the connectors for corrosion or damage.
5. Can I drive my 1996 Honda Civic with the P0113 code present?
- It is not recommended to drive with the P0113 code present, as it can lead to poor engine performance and potential damage over time.
6. How do I repair the P0113 code on my 1996 Honda Civic?
- Repair options include replacing the faulty IAT sensor, repairing any damaged wiring or connectors, and resetting the ECM to clear the code.
7. Is it possible to reset the P0113 code in a 1996 Honda Civic without fixing the issue?
- While you can clear the code temporarily by resetting the ECM, it is important to address the underlying issue causing the high voltage condition in the IAT sensor circuit.
8. Can a dirty air filter cause the P0113 code in a 1996 Honda Civic?
- A dirty air filter may indirectly contribute to the P0113 code by affecting the IAT sensor readings, but it is not a direct cause of the high voltage condition.
9. How much does it typically cost to repair the P0113 code on a 1996 Honda Civic?
- The cost of repairing the P0113 code can vary depending on the specific issue, but it may range from $50 to $200 for parts and labor.
10. Will the P0113 code cause my 1996 Honda Civic to fail an emissions test?
- Yes, the P0113 code can cause your vehicle to fail an emissions test due to its impact on engine performance and emissions control systems.
Discuss the causes and fixes for P0113 1996 Honda Civic OBDII Code
Code P0113 1996 Honda Civic comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
