P0112 Audi Code - Intake Air Temperature Circuit Low Input
Quick Answer
The Intake Air Temperature (IAT) sensor is built into mass air flow sensor or in some vehicles mounted to the air filter duct housing. Common causes include Faulty Intake Air Temperature (IAT) sensor, Dirty air filter, Intake Air Temperature (IAT) sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0112 Audi indicates Intake Air Temperature Circuit Low Input.
- Common causes
- Common causes include Faulty Intake Air Temperature (IAT) sensor, Dirty air filter, Intake Air Temperature (IAT) sensor harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0112 Audi Description
What are the Possible Causes of the DTC P0112 Audi?
- Faulty Intake Air Temperature (IAT) sensor
- Dirty air filter
- Intake Air Temperature (IAT) sensor harness is open or shorted
- Intake Air Temperature (IAT) sensor circuit poor electrical connection
How to Fix the DTC P0112 Audi?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0112 Audi code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0112 Audi code?
Need more information on how to fix the P0112 Audi code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0112 Audi code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0112 Audi Code
1. What are the common symptoms of OBDII code P0112 in an Audi?
- Common symptoms include poor engine performance, rough idling, reduced fuel efficiency, and potential stalling.
2. What does the OBDII code P0112 Audi 'Intake Air Temperature Circuit Low Input' indicate?
- This code indicates that the intake air temperature sensor is reporting a lower than expected reading to the engine control module.
3. What are the possible causes of the P0112 code in an Audi?
- Possible causes include a faulty intake air temperature sensor, damaged wiring or connectors, a malfunctioning engine control module, or issues with the intake air temperature sensor circuit.
4. How can I diagnose the P0112 code in my Audi?
- To diagnose the P0112 code, you can use an OBDII scanner to read the code and check the intake air temperature sensor for proper operation, inspect the wiring and connectors for damage, and test the sensor circuit for continuity.
5. Can I drive my Audi with the P0112 code present?
- It is not recommended to drive your Audi with the P0112 code present, as it can lead to poor engine performance and potential further damage if left unresolved.
6. How can I repair the P0112 code in my Audi?
- Repairing the P0112 code typically involves replacing the faulty intake air temperature sensor, repairing any damaged wiring or connectors, or addressing any issues with the engine control module.
7. Are there any DIY tips for fixing the P0112 code in an Audi?
- DIY tips include checking the sensor wiring and connectors for visible damage, ensuring proper sensor connection, and consulting the vehicle's service manual for specific repair instructions.
8. Will resetting the OBDII code P0112 in my Audi make it go away permanently?
- Resetting the code may temporarily clear it, but if the underlying issue causing the P0112 code is not addressed, it is likely to reappear upon further driving.
9. Can extreme weather conditions trigger the P0112 code in an Audi?
- Yes, extreme temperature conditions can sometimes affect the intake air temperature sensor readings, potentially triggering the P0112 code.
10. Is it recommended to seek professional help to diagnose and repair the P0112 code in an Audi?
- Yes, it is advisable to seek professional help if you are not familiar with automotive diagnostics and repairs to accurately diagnose and resolve the P0112 code in your Audi.
Discuss the causes and fixes for P0112 Audi OBDII Code
-
p0112 code is hard code, I installed a new sensor and no change I checked for power at the connector and had power on one pin, who can tell how this system works novies and frustrated,,
Scott
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
