AutoCodesToyota – P0112 2017 Toyota RAV4

P0112 2017 Toyota RAV4 Code - Intake Air Temperature Circuit Low Input

Quick Answer

The Intake Air Temperature (IAT), mounted on the Mass Air Flow meter sub-assembly, monitors the intake air temperature. Common causes include Dirty air filter, Faulty Intake Air Temperature (IAT) Sensor (Part of the Mass Air Flow [MAF] Sensor), Intake Air Temperature sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0112 2017 Toyota RAV4 indicates Intake Air Temperature Circuit Low Input.
Common causes
Common causes include Dirty air filter, Faulty Intake Air Temperature (IAT) Sensor (Part of the Mass Air Flow [MAF] Sensor), Intake Air Temperature sensor harness is open or shorted.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 421
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Aug 22, 2022
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0112 2017 Toyota RAV4 Description

The Intake Air Temperature (IAT), mounted on the Mass Air Flow meter sub-assembly, monitors the intake air temperature. The intake air temperature sensor has a built-in thermistor with a resistance that varies according to the temperature of the intake air. When the intake air temperature is low, the resistance of the thermistor increases. When the temperature is high, the resistance drops. These variations in resistance are transmitted to the Engine Control Module (ECM) as voltage changes.
The ECM monitors the sensor voltage and uses this value to calculate the intake air temperature. When the sensor output voltage deviates from the normal operating range, the ECM interprets this as a malfunction in the intake air temperature sensor circuit and stores a Diagnostic Trouble Code (DTC).
OBDII Code P0112 2017 Toyota RAV4 - Intake Air Temperature Circuit Low Input - AutoCodes.com
P0112 2017 Toyota RAV4 Code - Intake Air Temperature Circuit Low Input

What are the Possible Causes of the DTC P0112 2017 Toyota RAV4?

  • Dirty air filter
  • Faulty Intake Air Temperature (IAT) Sensor (Part of the Mass Air Flow [MAF] Sensor)
  • Intake Air Temperature sensor harness is open or shorted
  • Intake Air Temperature sensor circuit poor electrical connection
  • Faulty Engine Control Module (ECM)

How to Fix the DTC P0112 2017 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0112 2017 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0112 2017 Toyota RAV4 code?

Need more information on how to fix the P0112 2017 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0112 2017 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0112 2017 Toyota RAV4 Code

What does the OBDII code P0112 mean for a 2017 Toyota RAV4?

Code P0112 indicates the Intake Air Temperature (IAT) sensor is reporting an unusually low input voltage, suggesting a low temperature reading.

What are the symptoms of code P0112 in a 2017 Toyota RAV4?

Symptoms may include poor engine performance, reduced fuel efficiency, hard starts, and the Check Engine Light illuminating.

What causes the P0112 code in a 2017 Toyota RAV4?

Possible causes include a faulty IAT sensor, damaged wiring or connectors, a short circuit, or excessive dirt buildup on the sensor.

Can I drive my 2017 Toyota RAV4 with code P0112 active?

While the vehicle may still run, driving with this code can lead to poor fuel efficiency and potential damage to engine components over time.

How do you fix the P0112 code on a 2017 Toyota RAV4?

Common fixes include inspecting and replacing the IAT sensor, repairing damaged wiring or connectors, and clearing the code with an OBDII scanner.

Where is the IAT sensor located on a 2017 Toyota RAV4?

The IAT sensor is typically located in the intake manifold or air intake hose, near the air filter housing.

How can I test the IAT sensor on a 2017 Toyota RAV4?

You can test the IAT sensor using a multimeter to check its resistance values at different temperatures and compare them to the manufacturer’s specifications.

What happens if I ignore code P0112 on my 2017 Toyota RAV4?

Ignoring this code can lead to long-term engine inefficiency, increased emissions, and possible damage to other engine components.

How much does it cost to repair code P0112 on a 2017 Toyota RAV4?

Repair costs vary but typically range from $50 to $200 for parts and labor, depending on whether the sensor or wiring needs replacement.

Can a dirty air filter cause code P0112 on a 2017 Toyota RAV4?

Yes, a dirty air filter can restrict airflow and potentially affect the IAT sensor’s readings, but it’s not a common cause of this code.

Discuss the causes and fixes for P0112 2017 Toyota RAV4 OBDII Code

Code P0112 2017 Toyota RAV4 comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play