P0112 2010 Honda Accord Code - Intake Air Temperature Circuit Low Voltage
Quick Answer
The Intake Air Temperature (IAT) sensor is built into mass air flow sensor or in some vehicles mounted to the air filter duct housing. Common causes include Faulty Intake Air Temperature (IAT) sensor, Dirty air filter, Intake Air Temperature (IAT) sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0112 2010 Honda Accord indicates Intake Air Temperature Circuit Low Voltage.
- Common causes
- Common causes include Faulty Intake Air Temperature (IAT) sensor, Dirty air filter, Intake Air Temperature (IAT) sensor harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0112 2010 Honda Accord Description
What are the Possible Causes of the DTC P0112 2010 Honda Accord?
- Faulty Intake Air Temperature (IAT) sensor
- Dirty air filter
- Intake Air Temperature (IAT) sensor harness is open or shorted
- Intake Air Temperature (IAT) sensor circuit poor electrical connection
How to Fix the DTC P0112 2010 Honda Accord?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0112 2010 Honda Accord code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0112 2010 Honda Accord code?
Need more information on how to fix the P0112 2010 Honda Accord code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0112 2010 Honda Accord code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0112 2010 Honda Accord Code
1. What are the common symptoms of OBDII code P0112 in a 2010 Honda Accord?
- Common symptoms include rough idling, poor fuel economy, hesitation during acceleration, and potential stalling.
2. What does the OBDII code P0112 on a 2010 Honda Accord indicate?
- The code P0112 indicates a fault in the Intake Air Temperature (IAT) sensor circuit, specifically low voltage.
3. What are the possible causes of the Intake Air Temperature Circuit Low Voltage code in a 2010 Honda Accord?
- Possible causes include a faulty IAT sensor, damaged wiring or connectors in the IAT circuit, or a problem with the engine control module (ECM).
4. How can I diagnose the cause of OBDII code P0112 in my 2010 Honda Accord?
- To diagnose the issue, you can use a multimeter to test the IAT sensor for proper resistance, check the wiring and connectors for damage, and inspect the ECM for any faults.
5. Can a dirty air filter trigger the P0112 code in a 2010 Honda Accord?
- While a dirty air filter itself may not directly cause the P0112 code, restricted airflow due to a heavily clogged air filter can affect the IAT sensor readings and lead to related issues.
6. Is it safe to drive my 2010 Honda Accord with the P0112 code present?
- It is not recommended to drive your vehicle with the P0112 code active, as it can affect engine performance and potentially lead to other problems if left unresolved.
7. What are some repair tips for resolving the Intake Air Temperature Circuit Low Voltage code in a 2010 Honda Accord?
- Repair tips include checking and cleaning the IAT sensor, repairing any damaged wiring or connectors, and resetting the fault code to see if it returns.
8. Can a DIY enthusiast fix the P0112 code in a 2010 Honda Accord?
- Depending on your skill level and access to tools, you may be able to address the P0112 code yourself by following diagnostic procedures and making necessary repairs to the IAT circuit.
9. How much can I expect to pay for professional repairs for the P0112 code in a 2010 Honda Accord?
- The cost of professional repairs for the P0112 code can vary, but it may include diagnostic fees, parts replacement, and labor, which could range from $100 to $300 or more.
10. How can I prevent the Intake Air Temperature Circuit Low Voltage code from reoccurring in my 2010 Honda Accord?
- To prevent the P0112 code from coming back, ensure proper maintenance of the IAT sensor and associated components, regularly inspect the wiring for any signs of wear, and address any engine issues promptly.
Discuss the causes and fixes for P0112 2010 Honda Accord OBDII Code
Code P0112 2010 Honda Accord comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
