AutoCodes – Scion – P0112 2007 Scion xB

P0112 2007 Scion xB Code - Intake Air Temperature Circuit Low Input

Quick Answer

The Intake Air Temperature (IAT) sensor is built into mass air flow sensor or in some vehicles mounted to the air filter duct housing. Common causes include Faulty Intake Air Temperature (IAT) sensor, Dirty air filter, Intake Air Temperature (IAT) sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0112 2007 Scion xB indicates Intake Air Temperature Circuit Low Input.
Common causes
Common causes include Faulty Intake Air Temperature (IAT) sensor, Dirty air filter, Intake Air Temperature (IAT) sensor harness is open or shorted.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 3,618
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jun 14, 2020
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P0112 2007 Scion xB Description

The Intake Air Temperature (IAT) sensor is built into mass air flow sensor or in some vehicles mounted to the air filter duct housing. The sensor detects intake air temperature and transmits a signal to the Engine Control Module (ECM).The temperature sensing unit uses a thermistor which is sensitive to the change in temperature. Electrical resistance of the thermistor decreases in response to the temperature rise. The Intake Air Temperature signal is used as an input for various systems in the vehicle.
OBDII Code P0112 2007 Scion xB - Intake Air Temperature Circuit Low Input - AutoCodes.com
P0112 2007 Scion xB Code - Intake Air Temperature Circuit Low Input

What are the Possible Causes of the DTC P0112 2007 Scion xB?

  • Faulty Intake Air Temperature (IAT) sensor
  • Dirty air filter
  • Intake Air Temperature (IAT) sensor harness is open or shorted
  • Intake Air Temperature (IAT) sensor circuit poor electrical connection

How to Fix the DTC P0112 2007 Scion xB?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0112 2007 Scion xB code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0112 2007 Scion xB code?

Need more information on how to fix the P0112 2007 Scion xB code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0112 2007 Scion xB code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0112 2007 Scion xB Code

1. What are the common symptoms of OBDII code P0112 on a 2007 Scion xB?

- Common symptoms include poor engine performance, rough idling, decreased fuel efficiency, and potential stalling.

2. What does the OBDII code P0112 indicate in a 2007 Scion xB?

- The code P0112 indicates that the Intake Air Temperature (IAT) sensor circuit is detecting a low input signal.

3. What are the possible causes of OBDII code P0112 on a 2007 Scion xB?

- Possible causes include a faulty IAT sensor, damaged wiring or connectors in the IAT circuit, or a problem with the engine control module (ECM).

4. How can I diagnose the cause of OBDII code P0112 on my 2007 Scion xB?

- You can diagnose the issue by checking the IAT sensor for proper operation, inspecting the wiring and connectors for damage, and using a multimeter to test the circuit.

5. Can a dirty air filter cause OBDII code P0112 on a 2007 Scion xB?

- While a dirty air filter can affect engine performance, it typically does not trigger the P0112 code. Focus on checking the IAT sensor and related components first.

6. Is it safe to continue driving with OBDII code P0112 present on a 2007 Scion xB?

- It is generally not recommended to drive with the P0112 code active, as it can lead to further engine issues and potential damage over time.

7. How can I reset the OBDII code P0112 on my 2007 Scion xB?

- You can reset the code using an OBDII scanner or by disconnecting the car's battery for a few minutes to clear the ECM's memory.

8. Will OBDII code P0112 cause the check engine light to illuminate on a 2007 Scion xB?

- Yes, the P0112 code will trigger the check engine light to illuminate on the dashboard of your 2007 Scion xB.

9. Can a DIY enthusiast repair OBDII code P0112 on a 2007 Scion xB?

- Depending on your mechanical skills, you may be able to replace the IAT sensor or repair wiring issues yourself. However, more complex problems may require professional assistance.

10. What is the typical cost to repair OBDII code P0112 on a 2007 Scion xB at a mechanic or dealership?

- The cost of repairing the P0112 code can vary depending on the exact cause, but it may range from $100 to $300 at a mechanic or dealership.

Discuss the causes and fixes for P0112 2007 Scion xB OBDII Code

Code P0112 2007 Scion xB comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play